When the spring, with the attached 275.0 g mass, is displaced from its new equilibrium position, it undergoes SHM. Calculate the period of oscillation, T , neglecting the mass of the spring itself.

Final answer:

The work done when a 185g tomato is lifted 15.0m is 27.261 J. If 82.1% of this work is converted to kinetic energy, the velocity of the tomato when it hits the ground is approximately 15.54 m/s.

Explanation:

To determine the work done when lifting a 185g tomato 15.0m, we use the formula for gravitational potential energy (GPE), which is equivalent to the work done against gravity.

Work (W) = mass (m) × gravitational acceleration (g) × height (h)
m = 185 g = 0.185 kg (since 1g = 0.001 kg)
g = 9.8 m/s²
h = 15.0 m

W = 0.185 kg × 9.8 m/s² × 15.0 m
W = 27.261 J

To determine the velocity (v) when the tomato hits the ground, assuming 82.1% of the work done is converted to kinetic energy (KE), we calculate:

KE = 0.821 × W
KE = 0.821 × 27.261 J
KE = 22.379 J

The formula for KE is:

KE = 1/2 m v²
Solving for v gives:

v = √(2 × KE / m)
v = √(2 × 22.379 J / 0.185 kg)
v ≈ 15.54 m/s

Thus, the velocity of the tomato when it hits the ground, assuming 82.1% conversion of energy, is approximately 15.54 m/s.

Answer:

The right leg (oil on top) is higher

Explanation:

Given:

The mass density of oil is lesser than the mass density of water.

This is justified by the equation:

[tex]P=\rho.g.h[/tex]

where:

[tex]\rho =[/tex] density of the liquid

[tex]g=[/tex] acceleration due to gravity

[tex]h=[/tex] height of the liquid column

The car's speed at the top of the loop is approximately 0.41 m/s.

At the top of the loop-the-loop, the normal force equals the magnitude of the gravitational force, which means the net force acting on the roller coaster car is zero.

This condition occurs when the car is just about to lose contact with the track due to insufficient normal force.

Using the centripetal force formula, [tex]\( F_{\text{net}} = \frac{mv^2}{r} \)[/tex], where \( m \) is the mass of the car, v is its speed, and \( r \) is the radius of the loop.

At the top of the loop, the net force is zero, so we equate the gravitational force and the centripetal force:

[tex]\[ mg = \frac{mv^2}{r} \][/tex]

Solving for v, we get:

[tex]\[ v = \sqrt{gr} \][/tex]

Substituting the given radius [tex]\( r = \frac{33 \, \text{mm}}{2} = 0.0165 \, \text{m} \)[/tex] and the acceleration due to gravity [tex]\( g = 9.8 \, \text{m/s}^2 \)[/tex], we find:

[tex]\[ v = \sqrt{(9.8 \, \text{m/s}^2)(0.0165 \, \text{m})} \approx 0.41 \, \text{m/s} \][/tex]

Therefore, the car's speed at the top of the loop is approximately 0.41 m/s.

The correct conclusion would be 0.248 meters for the length of a pendulum with a period of 1 second. Therefore, the SI unit of length, the meter, would have had to be 0.752 m shorter had Huygens' suggestion to define it as the length of such a pendulum been followed.

The question proposes a discussion between Tamsen and Vera about how much shorter the SI unit of length, the meter, would have had to be if Christian Huygens' suggestion to define an international unit of length as the length of a simple pendulum with a period of 1 s, had been followed. Huygens' suggestion corresponds to the second pendulum or gravitational pendulum, which was an arrangement constituted by a simple pendulum adjusted so that its time of oscillation is exactly 2 seconds, meaning 'going and coming back'.

Mathematically, the formula to calculate the length of a pendulum with a given periodic time is given by L = g×(T/2×pi)² where g is the acceleration due to gravity and T is the period of the pendulum. For T = 1 second and g approximated to 9.81 m/s², the length derived would be approximately 0.248 meters. Therefore, among the given options, Vera and Tamsen's correct conclusion would be c) 0.248 m.

This means the SI unit of length, the meter, would have had to be 1 meter - 0.248 m = 0.752 m shorter had Huygens' suggestion been followed.

https://brainly.com/question/29702798

#SPJ11

Answer:

A=0.199

Explanation:

We are given that  

Mass of spring=m=450 g=[tex]=\frac{450}{1000}=0.45 kg[/tex]

Where 1 kg=1000 g

Frequency of oscillation=[tex]\nu=1.2Hz[/tex]

Total energy of the oscillation=0.51 J

We have to find the amplitude of oscillations.

Energy of oscillator=[tex]E=\frac{1}{2}m\omega^2A^2[/tex]

Where [tex]\omega=2\pi\nu[/tex]=Angular frequency

A=Amplitude

[tex]\pi=\frac{22}{7}[/tex]

Using the formula

[tex]0.51=\frac{1}{2}\times 0.45(2\times \frac{22}{7}\times 1.2)^2A^2[/tex]

[tex]A^2=\frac{2\times 0.51}{0.45\times (2\times \frac{22}{7}\times 1.2)^2}=0.0398[/tex]

[tex]A=\sqrt{0.0398}=0.199[/tex]

Hence, the amplitude of oscillation=A=0.199

The amplitude of oscillation will be "0.199".

Given:

Mass of spring,

or,

           = 0.45 kg

Frequency,

Total energy,

As we know the formula,

→ [tex]E = \frac{1}{2} m \omega^2 A^2[/tex]

By putting the values, we get

→ [tex]0.51= \frac{1}{2}\times 045 (2\times \frac{22}{7}\times 1.2 )^2 A^2[/tex]

→   [tex]A^2 = \frac{2\times 0.51}{0.45(2\times \frac{22}{7}\times 1.2 )^2}[/tex]

          [tex]= 0.0398[/tex]

→     [tex]A = \sqrt{0.0398}[/tex]

          [tex]= 0.199[/tex]

Thus the above response is right.

Learn more:

https://brainly.com/question/15969276

To warm the cold air inhaled during a breath to body temperature requires about 35.05J of energy or heat. This results in a total loss of around 44.16 KJ of heat due to respiration per hour.

This is a question about the heat exchange between the human body and the surrounding air when breathing, in cold weather conditions. We can solve it using the concepts of heat transfer and specific heat capacity.

A. To find the amount of heat necessary to warm the cold air to body temperature, we first need to determine the change in temperature. This would be (37-(-19)) = 56°C. The mass of the air breathed in with each breath can be calculated as 0.470L * 1.3g/L = 0.611g. Converting this to kg, we get 0.000611 Kg. The quantity of heat, Q, can be found using the formula Q = mcΔT, where m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. Plugging in the values, we get Q = 0.000611 Kg * 1020 J/Kg°C * 56°C = 35.05J.

B. The total amount of heat lost per hour due to respiration can be calculated by first finding the heat lost per minute: Q per minute = Q per breath * respiration rate = 35.05J/breath * 21 breaths/minute = 736.05 J/minute. Converting this to an hourly rate gives us 736.05 J/minute * 60 minutes/hour = 44,163J/hour or about 44.16 KJ/hour. So, about 44.16 KJ of heat is lost via respiration each hour.

https://brainly.com/question/13433948

#SPJ12

The amount of heat needed to warm to internal body temperature the air exchanged with each breath on a cold day is 74.3 J per breath. The total heat loss per hour for a respiration rate of 21.0 breaths per minute is approximately 93.6 kJ/hour.

To calculate the amount of heat needed to warm the air inhaled during breathing to the internal body temperature, we can use the formula:

Q = mcΔT

Where:

The mass of 1.0 L of air at 1.3 g/L is 0.0013 kg. The change in temperature needed to warm air from -19°C to 37°C is 56°C or 56 K since the size of 1 degree on both scales is the same. Thus:

Q = 0.0013 kg * 1020 J/kg·K * 56 K

Q = 74.3 J per breath.

To find the heat lost per hour at a respiration rate of 21.0 breaths per minute, we do:

Heat loss per hour = Q * number of breaths per hour = 74.3 J * (21 breaths/min * 60 min/hour)

Heat loss per hour = 74.3 J * 1260 breaths/hour = 93618 J/hour, or approximately 93.6 kJ/hour.

https://brainly.com/question/13996407

#SPJ3

Final answer:

For the return flight, the bird's average velocity is 6.38 m/s, while for the whole episode, the average velocity is 0 m/s.

Explanation:

a) To find the bird's average velocity for the return flight, we need to calculate the displacement and divide it by the time taken. The displacement is the distance between the release point and the nest, which is 5220 km. The time taken is 13.3 days, which can be converted to seconds by multiplying by 24 (hours in a day) and 60 (minutes in an hour). Therefore, the average velocity is:

Average velocity = displacement / time = 5220 km / (13.3 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute) = 6.38 m/s

b) To find the bird's average velocity for the whole episode, we need to calculate the total displacement and divide it by the total time taken. The total displacement is 0 km, as the bird returns to its nest. The total time taken is the time taken for the return flight plus the time taken for the outward flight, which is 2 * 13.3 days. Therefore, the average velocity is:

Average velocity = total displacement / total time = 0 km / (2 * 13.3 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute) = 0 m/s

The can of soft drink in a refrigerator is modelled as a closed system because while heat energy is exchanged with its surroundings, no matter is exchanged. An open system, in contrast, allows both energy and matter to be exchanged.

In the scenario where a can of soft drink is placed into a refrigerator to cool, you would model the can of soft drink as a closed system. A closed system is one in which energy can be exchanged with its surroundings, but matter cannot. In this case, the can of soft drink is transferring heat energy to its surroundings, i.e., the refrigerator, until equilibrium is achieved, but the soda itself remains within the can - no matter is exchanged.

An open system, on the other hand, allows both energy and matter to be exchanged with its environment. The dissolving of CO2 in soft drinks, as mentioned in the reference, is an example of an open system, where matter (CO2) is able to escape from the soft drink when the can or bottle is opened.

It's important to note that while practical real-world systems are ultimately open due to unavoidable interactions with the surroundings, we often model systems as closed (or even isolated) in order to simplify the analysis.

https://brainly.com/question/14782983

#SPJ12

The correct answer is that the can of soft drink would be modeled as a closed system.

In thermodynamics, a closed system is defined as a system that can exchange energy (such as heat) with its surroundings, but not matter. This means that while the can of soft drink can absorb or release heat to the refrigerator (its surroundings), no matter (like the soft drink itself) is exchanged between the can and the refrigerator.

Therefore, when the can of soft drink is placed in the refrigerator to cool, it is appropriately modeled as a closed system because only energy in the form of heat is transferred between the can and the refrigerator, and there is no transfer of matter.

The void ratio of the soil is 1.2045, the specific gravity of solids is 2.6329, and the saturated unit weight is 82.7586 lb/ft3.

The void ratio of the soil can be determined using the formula:

e = (1 + w) / (1 - w)

where e is the void ratio and w is the moisture content. Plugging in the values, we get:

e = (1 + 0.17) / (1 - 0.17) = 1.2045

To calculate the specific gravity of solids, we can use the formula:

Gs = (1 + e) * (1 - S) / (1 - e * S)

where Gs is the specific gravity of solids and S is the degree of saturation. Substituting the given values:

Gs = (1 + 1.2045) * (1 - 0.6) / (1 - 1.2045 * 0.6) = 2.6329

The saturated unit weight can be found using the equation:

Gamma_sat = Gamma_dry / (1 + w)

where Gamma_sat is the saturated unit weight and Gamma_dry is the dry unit weight. Given that the unit weight of the soil is 96 lb/ft3, we have:

Gamma_sat = 96 / (1 + 0.17) = 82.7586 lb/ft3

Learn more about Soil properties here:

https://brainly.com/question/33181986

#SPJ3

Answer:

D.frequency.

Explanation:

The number of times a wave passes through a particular point in a time of 1 second is called the frequency.

Amplitude is the maximum height the wave reaches from the reference axis of the wave

Wavelength is the distance between the two upper (crest) or lower (troughs) points of a wave.

Crest is the top most part of a wave.

Hence, the question is referring to frequency.

Answer:

False

Explanation:

There is less pressure higher in the atmosphere, which means that air will expand, and thus cool

Answer:

[tex]K=\frac{GmM}{2R}[/tex]

Explanation:

The kinetic energy is defined as:

[tex]K=\frac{mv^2}{2}(1)[/tex]

Here, m is the object's mass and v its speed. In this case the speed of the satellite is the orbital speed, which is given by:

[tex]v_{orb}=\sqrt\frac{GM}{R}(2)[/tex]

Here, G is the gravitational constant, M is the mass of the object that the satellite is orbiting and R is the radius of its circular orbit. Replacing (2) in (1):

[tex]K=\frac{mv_{orb}^2}{2}\\K=\frac{m(\sqrt\frac{GM}{R})^2}{2}\\K=\frac{GmM}{2R}[/tex]

The kinetic energy of a satellite in a circular orbit can be found using the equation K=GMm/2r, involving the gravitational constant, mass of the satellite, mass of the body being orbited, and the radius of the orbit. This kinetic energy is half the potential energy and equal to the total energy of the satellite.

The kinetic energy K of a satellite with mass m in a circular orbit with radius R can be defined using the equation of the kinetic energy K = 1/2 * mv², where m is the mass of the satellite and v is its speed. However, in the context of gravitational forces, we must consider that the gravitational force provides the centripetal force necessary for the satellite to maintain its orbit with speed v. Therefore, we have GMm/r² = mv²/r where G is the gravitational constant and M is the mass of the body the satellite is orbiting.

When we solve for the speed v, we find that v=sqrt(GM/R), which leads us to an equation for the kinetic energy of K = GMm/2r. These equations demonstrate that the kinetic energy of the satellite is dependent not only on its own mass and speed, but also on the mass of the body it is orbiting and the radius of its orbit.

The concept that the kinetic energy of a satellite in circular orbit is half the magnitude of the potential energy, and the same as the magnitude of the total energy, is an important aspect of understanding these calculations. We also note that the gravitational constant G is by far the least well determined of all fundamental constants in physics.

https://brainly.com/question/26472013

#SPJ3

Answer:

[tex]L_f=26.8108 ft[/tex]

Part B:

For Final Reduction

[tex]v_f=48.5436ft/min[/tex]

Explanation:

Part A:

At each step 0.8 (100-20)% of thickness is left

Final Thickness t_f:

[tex]t_f=(0.80)(0.80)(0.80)*3\\t_f=1.536 in[/tex]

Width increases by 0.03 in each step so (100+3)%=1.03

Final Width w_f:

[tex]w_f=(1.03)(1.03)(1.03)*12\\w_f=13.1127 in[/tex]

Conservation of volume:

[tex]t_ow_oL_o=t_fw_fL_f\\L_f=\frac{t_ow_oL_o}{t_fw_f} \\L_f=\frac{3*12*(15*12)}{1.536*13.1127}\\L_f=321.730 in\\L_f=26.8108 ft[/tex]

Part B:

[tex]t_ow_ov_o=t_fw_fv_f[/tex]

At First reduction exit Velocity:

[tex]v_f=\frac{t_ow_oL_o}{t_fw_f} \\v_f=\frac{3*12*(40)}{0.8*3*1.03*12}\\v_f=48.5439ft/min[/tex]

At 2nd Reduction:

[tex]v_f=\frac{0.8*3*1.03*12*40}{0.8^2*3*1.03^2*12}\\v_f=48.5436ft/min[/tex]

For Final Reduction:

[tex]v_f=\frac{0.8^2*3*1.03^2*12*40}{0.8^3*3*1.03^3*12}\\v_f=48.5436ft/min[/tex]

Answer:

The initial charges on the spheres are  [tex]6.796\ 10^{-6}\ c[/tex] and [tex]-3.898\ 10^{-6}\ c[/tex]

Explanation:

Electrostatic Force

Two charges q1 and q2 separated a distance d exert a force on each other which magnitude is computed by the known Coulomb's formula

[tex]\displaystyle F=\frac{K\ q_1\ q_2}{d^2}[/tex]

We are given the distance between two unknown charges d=50 cm = 0.5 m and the attractive force of -0.9537 N. This means both charges are opposite signs.

With these conditions we set the equation

[tex]\displaystyle F_1=\frac{K\ q_1\ q_2}{0.5^2}=-0.9537[/tex]

Rearranging

[tex]\displaystyle q_1\ q_2=\frac{-0.9537(0.5)^2}{k}[/tex]

Solving for q1.q2

[tex]\displaystyle q_1\ q_2=-2.6492.10^{-11}\ c^2\ \ ......[1][/tex]

The second part of the problem states the spheres are later connected by a conducting wire which is removed, and then, the spheres repel each other with an electrostatic force of 0.0756 N.

The conducting wire makes the charges on both spheres to balance, i.e. free electrons of the negative charge pass to the positive charge and they finally have the same charge:

[tex]\displaystyle q=\frac{q_1+q_2}{2}[/tex]

Using this second condition:

[tex]\displaystyle F_2=\frac{K\ q^2}{0.5^2}=\frac{K(q_1+q_2)^2}{(4)0.5^2}=0.0756[/tex]

[tex]\displaystyle q_1+q_2=2.8983\ 10^{-6}\ C[/tex]

Solving for q2

[tex]\displaystyle q_2=2.8983\ 10^{-6}\ C-q_1[/tex]

Replacing in [1]

[tex]\displaystyle q_1(2.8983\ 10^{-6}-q_1)=-2.64917.10^{-11}[/tex]

Rearranging, we have a second-degree equation for q1.  

[tex]\displaystyle q_1^2-2.8983.10^{-6}q_1-2.64917.10^{-11}=0[/tex]

Solving, we have two possible solutions

[tex]\displaystyle q_1=6,796.10^{-6}\ c[/tex]

[tex]\displaystyle q_1=-3.898.10^{-6}\ c[/tex]

Which yields to two solutions for q2

[tex]\displaystyle q_2=-3.898.10^{-6}\ c[/tex]

[tex]\displaystyle q_2=6.796.10^{-6}\ c[/tex]

Regardless of their order, the initial charges on the spheres are [tex]6.796\ 10^{-6}\ c[/tex] and [tex]-3.898\ 10^{-6}\ c[/tex]

Answer:

At twice the distance, the electric potential is V/2.

Explanation:

The electric potential at a certain distance d from a point charge q can be represented by V:

V = kq/d .....1

Where q = charge ,d = distance between them, k = coulomb's constant.

When the distance is doubled d1 = 2d

Let V1 represent the electric potential after the distance have been doubled.

V1 = kq/2d = (kq/d)/2

V1 = V/2

Therefore, at twice the distance the electric potential is halved V1 = V/2

The electric potential (V) decreases as you increase your distance from the point charge. Therefore, at twice the distance from a charge, the electric potential will be halved, becoming V/2.

The electric potential (V) at a certain distance from a point charge, according to Coulomb's Law, is directly related to the charge and inversely related to the distance from it. Therefore, if we double the distance, the electric potential will be half as much. So, the electric potential at twice the distance from the point charge is V/2.

Think of it like this, if you're twice as far from the point charge, the effect of the charge (which in this case is represented by the electric potential) is lessened.

Therefore, the potential decreases as you increase your distance from the charge. Hence, at twice the distance from a charge, the electric potential will be halved, i.e., V/2.

https://brainly.com/question/32897214

#SPJ3

Answer:

No, the ride will not be safe according to the standards mentioned in the question because the value of momentum exceeds.

Explanation:

Given:

Now, we find the momentum of the car using the given mass and speed:

[tex]p'=m.v[/tex]

[tex]p'=780\times 3[/tex]

[tex]p'=2340\ kg.m.s^{-1}[/tex]

Therefore the ride will not be safe according to the standards mentioned in the question because the value of momentum exceeds.

The definition of volumetric charge density is given as the ratio between the load per unit volume, while the linear load is the same ratio of the load but per unit length. Applying these concepts then we have that the volumetric density of charge is,

Here,

q = Charge

V = Volume

Replacing we have,

[tex]\gamma = \frac{0.51}{\pi r^2 l}[/tex]

[tex]\gamma = \frac{0.51}{\pi (4*10^{-3})^2(0.33)}[/tex]

[tex]\gamma =30475.84C/m^3[/tex]

And the linear charge density is

[tex]\rho = \frac{q}{l}[/tex]

[tex]\rho = \frac{0.51}{0.33}[/tex]

[tex]\rho = 1.54C/m[/tex]

To determine the volume and linear charge densities, divide the total charge by the rod's volume and length, respectively, after calculating the volume using the formula for a cylinder.

The volume charge density (ρ) and the linear charge density (λ) are physical quantities that represent the distribution of electric charge in a material. To find the volume charge density, we divide the total charge (Q) by the volume (V) of the rod. The formula is ρ = Q/V. The linear charge density is found by dividing the charge by the length (L) of the rod, using the formula λ = Q/L.

Given that the charge Q is 0.51 C, distributed uniformly along a cylindrical rod with a length of 33 cm (or 0.33 m) and a radius of 4 mm (or 0.004 m), we first need to calculate the volume of the cylinder using the formula V = πr²h, where r is the radius and h is the height (length) of the cylinder. The volume V is then π ×(0.004 m)² ×0.33 m.

After computing the volume, we calculate ρ as ρ = 0.51 C / V. To find λ, we simply divide the charge by the length, λ = 0.51 C / 0.33 m. These computations will yield the volume and linear charge densities for the rod.

Answer:

7 / 1

Explanation:

The ratio of their amplitude = one-seventh and the ratio of their amplitude = the ratio of their wavelength

Ax / Ay = λx / λy  = 1 / 7

λy / λx = 7 / 1

The ratio of wavelengths is λ(y)/λ(x) = 1/49.

The energy of a wave is directly proportional to the square of the amplitude of the wave.

   E ∝ [tex]A^{2}[/tex] , where E is the energy of the wave and A is the apmlitude

We also know that enegy

E = hc/λ

E ∝ 1/λ

According to the question:

Let wave X has energy [tex]E_x[/tex] and amplitude [tex]A_x[/tex]

and wave Y has energy [tex]E_y[/tex] and amplitude [tex]A_y[/tex]

[tex]\frac{E_x}{E_y}=\frac{A_x^2}{A_y^2} \\\\\frac{E_x}{E_y}= \frac{(A_y/7)^2}{A_y}\\\\\frac{E_x}{E_y}=\frac{1}{49}[/tex] since it is given that [tex]A_x=\frac{1}{7}A_y[/tex]

{1/λ(x)} / {1/λ(y)} = 1/49

λ(y)/λ(x) = 1/49 is the ratio of the wavelengths.

Learn more:

https://brainly.com/question/20727911

Answer:

a) 88.1 rad/s

b) 0.286

Explanation:

given information:

diameter, d = 8 cm = 0.08 m

sphere's mass, m = 400 g = 0.4 kg

the distance from rest to the tip, h = 2.1 m

incline angle, θ = 25°

a) What is the sphere's angular velocity at the bottom of the incline?

mg(h sinθ) = 1/2 Iω² + 1/2mv²

I of solid sphere = 2/5 mr², thus

mg(h sinθ) = 1/2 (2/5 mr²) ω² + 1/2 mv², now we can remove the mass

g h sin θ = 1/5 r² ω² + 1/2 v²

ω = v/r, v = ωr

so,

g h sin θ = 1/5 r² ω² + 1/2 (ωr)²

g h sin θ = (7/10) r² ω²

ω² = 10 g h sin θ/7 r²

ω = √10 g h sin θ/7 r²

   = √10 (9.8) (2.1) sin 25° / 7 (0.04)²

   = 88.1 rad/s

b) What fraction of its kinetic energy(KE) is rotational?

fraction of its kinetic energy = rotational KE / total KE

total KE = total potential energy

             = m g h sin θ

             = 0.4 x 9.8 x 2.1 sin 25°

             = 3.48 J

rotational KE = 1/2 Iω²

                      = 1/5 mr²ω²

                      = 1/5 0.4 (0.04)²(88.1)²

                      = 0.99

fraction of its KE = 0.99/3.48

                            = 0.286

A) The sphere's angular velocity at the bottom of the incline is; ω = 88.1 rad/s

B) Fraction of its kinetic energy that is rotational is; 0.286

We are given;

Diameter; d = 8 cm = 0.08 m

Mass of sphere; m = 400 g = 0.4 kg

Distance from rest to the tip; h = 2.1 m

Angle of inclination; θ = 25°

a) To get the sphere's angular velocity at the bottom of the incline, we will use the expression;

mg(h*sinθ) = ¹/₂Iω² + ¹/₂mv²

where;

I of solid sphere = ²/₅mr²

Thus;

mg(h*sinθ) = ¹/₂(²/₅mr²)ω² + ¹/₂mv²

The mass m will cancel out to give;

gh*sin θ = ¹/₅r²ω² + ¹/₂v²

where v = ωr

Thus;

gh*sin θ = ¹/₅r²ω² + ¹/₂r²ω²

gh*sin θ = ⁷/₁₀r²ω²

ω = √[(¹⁰/₇)*g*h*(sin θ)/r²]

ω = √[(¹⁰/₇)*9.8*2.1*(sin 25)/(0.04)²]

ω = 88.1 rad/s

b) Fraction of its kinetic energy that is rotational = rotational KE/total KE

But, total KE = total potential energy

Thus;

KE_tot = mgh*sin θ

KE_tot = 0.4 * 9.8 * 2.1 sin 25°

KE_tot = 3.48 J

KE_rot = ¹/₂Iω²

I of solid sphere = ²/₅mr². Thus;

KE_rot = ¹/₅mr²ω²

KE_rot = ¹/₅ * 0.4 * 0.04² * 88.1²

KE_rot = 0.99 J

Fraction of its kinetic energy that is rotational = 0.99/3.48 = 0.286

Read more about Angular velocity at; https://brainly.com/question/9408577

Answer:

Remains the same

Explanation:

The speed of waves of higher and lower frequency both will be same.

the speed of sound in a medium is constant  and independent of it's frequency. Moreover, when the frequency changes wavelength changes accordingly, such that their product remains constant.

we know that

υ×λ = constant = velocity

υ= frequency

λ= wavelength.

Answer:

423m/s

Explanation:

Suppose after the impact, the bullet-block system swings upward a vertical distance of 0.4 m. That's means their kinetic energy is converted to potential energy:

[tex]E_p = E_k[/tex]

[tex]mgh = mv^2/2[/tex]

where m is the total mass and h is the vertical distance traveled, v is the velocity right after the impact at, which we can solve by divide both sides my m

Let g = 9.81 m/s2

[tex]gh = v^2/2[/tex]

[tex]v^2 = 2gh = 2 * 9.81* 0.4 = 7.848[/tex]

[tex]v = \sqrt{7.848} = 2.8m/s[/tex]

According the law of momentum conservation, momentum before and after the impact must be the same

[tex]m_uv_u + m_ov_o = (m_u + m_o)v[/tex]

where [tex]m_u = 0.01, v_u[/tex] are the mass and velocity of the bullet before the impact, respectively.[tex]m_ov_o[/tex] are the mass and velocity of the block before the impact, respectively, which is 0 because the block was stationary before the impact

[tex]0.01v_u + 0 = (0.01 + 1.5)*2.8[/tex]

[tex]0.01v_u = 4.23[/tex]

[tex]v_u = 4.23 / 0.01 = 423 m/s[/tex]

The initial velocity of the bullet just before it struck the block was 422 m/s.

To determine the velocity of a bullet just before it strikes a block of wood and causes a ballistic pendulum motion, we follow these steps:

[tex]p_{initial}[/tex] = [tex]P_{final}[/tex]
(0.01 kg)u = (1.51 kg)(2.8 m/s)
Simplifying this:
u = 1.51 kg * 2.8 m/s / 0.01 kg
u = 422 m/s

Thus, the initial velocity of the bullet just before it struck the block was 422 m/s.

Answer:

d. 500 m/s

Explanation:

Momentum: This is the product of the mass of a body to its velocity, The S.I unit of momentum is kgm/s.

Mathematically, momentum can be expressed as,

M = mv....................... equation 1

Where M = momentum, m = mass, v = velocity

deduced from the question,

Momentum of the car = momentum of the barrier.

MV = mv ............................. Equation 1

Where M = mass of the car, V = velocity of the car, m = mass of the barrier, v = velocity of the barrier.

making v the subject of the equation,

v = MV/m........................ Equation 2

Given: M = 1000 kg, V = 10 m/s, m = 20 kg.

Substitute into equation 2

v = 1000(10)/20

v = 500 m/s.

Hence the speed of the barrier = 500 m/s

The right option is d. 500 m/s

Answer:

The answer is zero. The total change in momentum is equal to the sum of the areas within the time interview 0-4s. The area under the graph is Force x time (F being the breadth and time the length)

The sun of the areas is zero.

Explanation:

See the attachment below for the full solution.

Thank you for reading this post. I hope it is helpful to you.

Answer:

a) No

b) the rock must have a minimum initial speed of 6.79m/s for it to reach the top of the building.

Explanation:

Given:

Height of the wall = 3.95m

Initial height = 1.60m

Initial speed = 5.00m/s

distance between the initial height and wall top = 3.95 - 1.60 = 2.35m

Using the formula;

v^2 = u^2 + 2as ....1

Where v = final velocity, u = initial velocity, a = acceleration, s = distance travelled

From equation 1

s = (v^2 - u^2)/2a ...2

Since the rock t moving up,

the acceleration = -g = -9.8m/s2

s = maximum height travelled

v = 0 (at maximum height velocity is zero)

Substituting into equation 2

s = (0 - 5^2)/(2×-9.8) = 1.28m

Therefore, the maximum height is 1.28 from his initial height Which is less than the 2.35m of the wall from his initial height. So the rock will not reach the top of the wall

b) Using equation 1:

u^2 = v^2 - 2as

v = 0

a = -9.8m/s

s = 2.35m. (distance between the initial height and wall top)

u^2 = 0 - 2(-9.8 × 2.35)

u^2 = 46.06

u = √46.06

u = 6.79m/s

Therefore, the rock must have a minimum initial speed of 6.79m/s

Answer: Pπr2

Explanation: Force is any interaction that affects an object,that if not opposed or treated will cause some changes in the object. Pressure is directly proportional to force,which means an increase in force will create a corresponding increase in the pressure of a system.

The force on the cloth will be The PRESSURE EXERTED ON THE CLOT (P) *THE PI( which is the RATIO of the circumference of the cylinder i.e3.14159) *the square of the ratio. Which is Pπr2.

The force exerted on the artery clot can be determined by the formula F = P x A, where F is the force, P is the pressure and A is the area. In the case of a cylindrical clot, A = πr². Therefore, the force F = P x πr².

The force exerted on the clot by the pressure in the artery can be determined by using the formula for the force exerted by a pressure on a surface, which is Force (F)= pressure (P) x Area (A). The pressure is given as P. The area of the surface the pressure is exerted upon can be found by considering the cross-sectional area of the cylinder (clot), that can be expressed as the product of pi and the square of the radius (r), or πr².

Therefore, the force on the clot can be calculated by substituting the cross-sectional area (A = πr²) into the equation F = P x A, giving us F = P x πr². In this way, we can understand how the pressure in the artery results in a force on the clot.

https://brainly.com/question/32400280

#SPJ3

Explanation:

a)

Sum of moments = 0 (Equilibrium)

T . cos (Q)*L = m*g*L/2

[tex]cos Q = \frac{\sqrt{(2.5^2 - L^2) } }{2.5}[/tex]

[tex]T*\frac{\sqrt{(2.5^2 - L^2) } }{2.5} * L = 0.1 *9.81*L/2[/tex]

[tex]T = \frac{2.4525}{\sqrt{(2.5)^2 - L^2} }[/tex]

b) If the String is shorter the Q increases; hence, Cos Q decreases which in turn increases Tension in the string due to inverse relationship!

c)

[tex]T = \frac{1.962}{\sqrt{(2)^2 - L^2} }[/tex]

The rotational equilibrium condition allows finding the responses for the tension of the rope are:

   A) T = 0.53 N

   B) If the rope shortens the tension increase..

   C) T = 0.57 N

Newton's second law for rotational motion gives a relationship between the torque, the moment of inertia and the angular acceleration of the bodies, in the special case that the acceleration is zero, it is called the equilibrium condition.

                  Σ τ = 0

Torque is defined as the vector product of the force and the distance, its modulus is:

                τ = F rsin θ  

where τ is the torque, F the force, r the distance and tea the angle between the force and the distance, it is a product (r sin θ ) it is called the perpendicular distance or arm.

In the attached we have a free body diagram of the system, let's apply the equilibrium condition,

Let's use trigonometry to descompose the force.  

                cos θ = [tex]\frac{T_x}{T}[/tex]  

               sin  θ = [tex]\frac{T_y}{T}[/tex]  

               Tₓ = T cos θ

               [tex]T_y[/tex] = T sin  θ

They indicate that the length of the bar is x = 1 m and the length of the cable is L = 2.5 m, let's find the angle

             cos  θ = [tex]\frac{x}{L}[/tex]  

              θ = cos⁻¹ [tex]\frac{x}{L}[/tex]  

              θ = cos⁻¹ [tex]\frac{1}{2.5}[/tex]

              θ = 66.4º

A) let's set our pivot point at the junction with the wall and the anti-clockwise direction of rotation is positive.

                 W [tex]\frac{L}{2}[/tex]  - Ty L = 0

                 W [tex]\frac{L}{2}[/tex]  = (T sin 66.4) L

                 [tex]T = \frac{mg}{s sin 66.4} \\ \\T = \frac{0.1 \ 9.8}{2 \ sin66.4}[/tex]  

                 T = 0.53 N

B) how the tension changes as the length of the string changes.

               T = [tex]\frac{mg}{2 sin \theta}[/tex]  

we can see that the change of the tension occurs by changing the value of the sine function.

           sin θ = [tex]\frac{y}{L_o}[/tex]

Let's use the Pythagorean theorem to find the opposite leg.

         L² = x² + y²

         y = [tex]\sqrt{L^2 - x^2 }[/tex] = [tex]L \ \sqrt {1^2 + (\frac{x}{L})^2 }[/tex]

Let's substitute.

         sin θ =  [tex]\sqrt{1 - \frac{x^2}{L^2} }[/tex]

if we use a binomial expansion.

          [tex](1 - a) ^{0.5} = 1 - \frac{1}{2} a + ...[/tex]

Let's substitute.

            sin  θ  = 1 -  [tex]\frac{1}{2} \ \frac{x}{L}[/tex]    

We can see that when the value of the length decreases the value of the sine decreases and this term is in the denominator of the expression of the tension, therefore the tension must increase.

C) the length of the rope is L = 2 m

           sin θ =  [tex]\sqrt{1 - (\frac{1}{2})^2 }[/tex]  

           sin θ = 0.866

           T = [tex]\frac{mg}{2sin \theta}[/tex]  

            T = [tex]\frac{0.1 \ 9.8}{2 \ 0.866}[/tex]  

            T =0.57 N

In conclusion, using the rotational equilibrium condition we can find the answers for the tension of the rope are:

   A) T = 0.53 N

   B) If the rope shortens the tension increase.

   C) T = 0.57 N

Learn more here:   https://brainly.com/question/13962404

To convert the equatorial diameter of the Moon from kilometers to miles, you can use the given conversion factor:

Equatorial diameter in miles = Equatorial diameter in kilometers × Conversion factor

Given:

Equatorial diameter of the Moon = 3476 kilometers

Conversion factor = 0.6214 miles/kilometer

Now, plug in the values:

Equatorial diameter in miles = 3476 km × 0.6214 miles/km

[tex]\[ \text{Equatorial diameter in miles} \approx 2160.9264 \, \text{miles} \][/tex]

So, the Moon's equatorial diameter is approximately 2160.93 miles.

Final answer:

To convert the Moon's diameter from 3476 kilometers to miles, multiply by the conversion factor of 0.6214 miles per kilometer, resulting in approximately 2160.6344 miles.

Explanation:

The question asks for the conversion of the Moon's diameter from kilometers to miles. The given diameter of the Moon is 3476 kilometers. To convert kilometers to miles, we use the provided conversion factor where 1 kilometer equals 0.6214 miles.

Here's how you can calculate the Moon's diameter in miles:

1. Multiply the Moon's diameter in kilometers by the conversion factor:
3476 kilometers × 0.6214 miles/kilometer

2. Calculating this gives:

2160.6344 miles
So, the Moon's diameter in miles is approximately 2160.6344.

Answer:

[tex]\vec{F} = -0.34\^x - 0.22\^y\\|\vec{F}| = -0.41~N[/tex]

Explanation:

The electric force between two point charges can be calculated by Coulomb's Law:

[tex]\vec{F} = \frac{1}{4\pi\epsilon_0}\frac{q_1q_2}{r^2}\^r[/tex]

We have to calculate the distance between two points; (0,0) and (0.3 m, 0.2 m).

[tex]r = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2} = \sqrt{(0.3)^2 + (0.2)^2} = 0.36~m[/tex]

Now we can apply Coulomb's Law

[tex]F = \frac{1}{4\pi\epsilon_0}\frac{(3\times 10^{-6})(-2\times 10^{-6})}{(0.36)^2} = -0.41~N[/tex]

The minus sign in front of the force means that the force is attractive.

The direction of the force can be calculated as follows:

[tex]F_x = F\cos(\theta)\\F_y = F\sin(\theta)[/tex]

where θ is the angle between F and the x-axis. This angle can be calculated by the triangle with edges 0.3 m, 0.2 m, and 0.36 m.  

So, sin(θ) = 0.2/0.36 = 0.55 and cos(θ) = 0.3/0.36 = 0.83.

Finally,

[tex]F_x = -0.41 \times 0.83 = -0.34~N\\F_y = -0.41 \times 0.55 = -0.22~N[/tex]

An electric force of approximately 0.0137 Newtons is exerted by the -2.00 μC charge on the 3.00 μC charge. The direction is attractive, implying that the force pulls the 3.00 μC charge towards the -2.00 μC charge.

The subject of this query pertains to the concept of electric force in Physics. Given the position coordinates and charge values, we can calculate the electric force between the two charges using Coulomb's Law, which states that the force between two charges is equal to the absolute value of the product of the charges, divided by the square of the distance between them, multiplied by the electrostatic constant (k = 8.99 x 10^9 N m²/C²).

First, determine the distance between the charges. Using the Pythagorean theorem, the distance is √(0.30² + 0.20²) = 0.36 m. Now plug the charge values (Q1=3.00 μC = 3.00 x 10^-6 C, Q2=-2.00 μC = -2.00 x 10^-6 C), and the distance (r=0.36 m) into Coulomb's Law (F=k|Q1*Q2|/r²).

The absolute value of the electric force would therefore be approximately |-2 x 8.99 x 10^9 N m²/C² x 3.00 x 10^-6 C x -2.00 x 10^-6 C / (0.36 m)²|, or about 0.0137 N (Newtons). Because force is a vector quantity, to find the direction of the force we need to consider the signs of the charges. Since they have opposite signs, the force is attractive, hence, the -2.00μC charge exerts a force towards itself on the +3.00 μC charge.

https://brainly.com/question/21093704

#SPJ3

Answer:

0.26315 s

Explanation:

The frequency of the ball tied to a string system is 3.8 rev/s.

That means in one second the ball will complete 3.8 revolutions.

The time period will be the reciprocal of this frequency

[tex]T=\dfrac{1}{f}\\\Rightarrow T=\dfrac{1}{3.8}\\\Rightarrow T=0.26315\ s[/tex]

The time period is 0.26315 s

It can be also solved in the following way

[tex]1\ s=3.8\ rev\\\Rightarrow 1\ rev=\dfrac{1}{3.8}\ s\\\Rightarrow 1\ rev=0.26315\ s[/tex]

The time period is 0.26315 s

Answer:

A net force of 11 kg is needed to produce an acceleration of 7.0 m/s²

Explanation:

Newton's Second Law: It states that the the rate of change of momentum of a body, is directly proportional to the applied force, and takes place along the direction of the the force.

From Newton's second law of motion, we can deduced that,

F = ma ......................... Equation 1.

Where F = Net force acting on the package, m = mass of the package, a = acceleration of the page.

From the question, when

F = 77 N, m = 11 kg.

a = F/m

a = 77/11

a = 7 m/s².

From the above, a net force of 11 kg is needed to produce an acceleration of 7.0 m/s²

Final answer:

To determine the net force needed to accelerate an 11-kg package at 7.0 m/s², apply Newton's second law using the formula Fnet = ma, which yields a net force of 77 N.

Explanation:

The student is asking how to use Newton's second law to calculate the net force required to produce a certain acceleration for an object of known mass. This is a physics problem that involves using the formula Fnet = ma (where Fnet is the net force, m is the mass, and a is the acceleration).

In this case, the mass m of the package is 11 kg, and the desired acceleration a is 7.0 m/s². To find the net force Fnet, we rearrange the formula as it is already in the form solving for the net force and simply substitute the known values:

Fnet = (11 kg) × (7.0 m/s²)

Now, we multiply:

Fnet = 77 N

Therefore, a net force of 77 N is indeed needed to accelerate an 11-kg package at 7.0 m/s².