The mole fraction of oxygen in dry air near sea level is 0.20948. The concentration of
oxygen is __________ molecules per liter, assuming an atmospheric pressure of 739 torr and
a temperature of 29.5°C
A) 6.23
B) 0.00819
C) 4.93 × 1021
D) 3.75 × 1024
E) 5.07 × 1022
Final answer:
To calculate the concentration of oxygen in molecules per liter, we use the ideal gas law equation and substitute the given values to find the number of moles of oxygen. The concentration of oxygen is approximately 29.5 molecules per liter.
Explanation:
To calculate the concentration of oxygen in molecules per liter, we need to use the ideal gas law equation: PV = nRT. Rearranging the equation, we have n = PV/RT, where n is the number of moles of oxygen in the given volume, P is the pressure, V is the volume, R is the ideal gas constant, and T is the temperature.
Given the pressure of 739 torr, volume of 1 liter, and temperature of 29.5°C (which needs to be converted to Kelvin), we can substitute these values into the equation. The ideal gas constant R is 0.0821 L*atm/(mol*K).
Therefore, the concentration of oxygen in molecules per liter is:
n = (739 torr * 1 L) / (0.0821 L*atm/(mol*K) * (29.5+273) K)
n = 29.5
So the concentration of oxygen is approximately 29.5 molecules per liter.
If a person weighs 500 N on Earth, what would she weigh on Jupiter, where the acceleration due to gravity is 26 m/s2?
Show all work leading to your answer.
The person's weigh on Jupiter is 1326.52 N.
What is weight?Weight is a measurement of how much gravity is pulling on a body.
Weight is calculated using the formula: w = mg.
Given that weight is a force, its SI unit is also a force; hence, the SI unit of weight is the Newton (N). By examining the weight expression, we can see that it is dependent on mass and the acceleration caused by gravity.
Given that: a person weighs 500 N on Earth.
the acceleration due to gravity on Jupiter is 26 m/s^2.
Acceleration due to gravity on Earth is 9.8 m/s^2.
Hence, mass of the person
= Weight on Earth/acceleration due to gravity on Earth
=500 N/9.8 m/s^2.
= 51.02 kg.
Her weigh on Jupiter is
= mass of the person × acceleration due to gravity on Jupiter
= 51.02 kg × 26 m/s^2
= 1326.52 N.
Learn more about weight here:
https://brainly.com/question/10069252
#SPJ2
In A boat race, Dan drove his motorboat over the 1000-meter course from start to finish in 40 seconds. What was Dan's average speed during the race ?
In a boat race, Dan drove his motorboat over the 1000-meter course from start to finish in 40 seconds, and his average speed during the race was 25 meters per second.
What is the calculation of average speed?The average speed indicated that the person maintained a linear speed during a drive because the speed is not always maintained properly due to various factors on the person's path.
Dan's average speed during the race is the distance he covered divided by the time taken to cover the distance.
Dan's average speed during the race was,
Average speed = distance covered / time taken
Average speed = 1000 meters / 40 seconds
Average speed = 25 meters per second
Hence, the average speed during the race was 25 meters per second for Dan while driving the motor boat.
Learn more about the average speed here.
https://brainly.com/question/12322912
#SPJ2
A youngster throws a rock from a bridge into the river 50 m below. The rock has a speed of 15 m/s when it leaves the youngster’s hand. Calculate the velocity of the rock when it strikes the water if it is thrown upward.
...?
how many moles are in 95 g of Na?
(Newton's Law of Motion) A person stands on a scale in an elevator. When the elevator is at rest, the scale reads 700 N. When the elevator starts to move, the scale reads 600N. (a) Is the elevator going up or down? Show your solution to support your answer. (b) What is its acceleration? ...?
The elevator is accelerating downward as the scale reads less than the person's weight. The acceleration of the elevator can be calculated using Newton's second law of motion and is approximately 1.4 m/s² downward.
Explanation:When a person stands on a scale in an elevator, the scale reading reflects the normal force, which is the force exerted by the scale on the person. If the scale reads 700 N when at rest and only 600 N when the elevator starts to move, it indicates that the elevator is accelerating downward.
This is because the normal force (and thus the scale reading) is less than the person's weight, which would only happen if the force due to acceleration opposes the force of gravity.
For part (b), to find the acceleration of the elevator, we can use Newton's second law of motion. The net force on the person can be calculated by subtracting the scale reading (the normal force) from the person's weight (gravitational force). Let m be the mass of the person and a be the acceleration. We have:
mg - FN = ma
Since mg is the weight (700 N) and FN is the scale reading (600 N):
700 N - 600 N = ma
100 N = ma
Using the given weight of 700 N and the acceleration due to gravity (9.8 m/s2), we find the mass m = 700 N / 9.8 m/s2 = approximately 71.43 kg.
Therefore, the equation becomes:
100 N = 71.43 kg * a
The acceleration a is about 1.4 m/s2 downward.
Fine grains of beach sand are assumed to be
spheres of radius 38.9 µm. These grains are
made of silicon dioxide which has a density of
2600 kg/m3
.
What is the mass of each grain of sand?
Answer in units of kg.
...?
If Jupiter takes 9.9259 hours to rotate on its axis and has a tangential speed of 12,293 m/s what is its radius?
69,912 km !!!!!!!!!!!!!!!!!!!!!
What is the purpose of the universal gravitation constant in newtons law of universal gravitation?
Explanation : According to the law, it says that F ∝ Mm ÷ R²
Where :
F = Gravitational forceM = Mass of the first bodym = mass of the second bodyR = Distance between the 2 bodiesFor calculating the gravitational force (F), we must have an equation. According to the law, we are ain't getting any equation. Hence, we must convert it by putting a constant.
A constant is any value that is fixed, and it won't change under any circumstance. And in this case, the value of the gravitational constant (G) is 6.67 x 10⁻¹¹.
Now, here comes the final equation : F = GMm ÷ R²
Where :
F = Gravitational forceG = Gravitational constant (6.67 x 10⁻¹¹)M = Mass of the first bodym = Mass of the second bodyR = Distance between the 2 bodiesHence, the main purpose of the universal gravitational constant (G) is to have an equation, which is F = GMm ÷ R².
What force is needed to give a 4.5 kg bowling ball an acceleration of 9 m/s^2?
If element X has 99 protons, how many elctrons does it have?
Which process forms rivers and valleys?
A. Oceanic-oceanic convergence
B. Exposed batholiths
C. Folding, uplift, and erosion
D. Volcanoes
What is the upper block's acceleration if the coefficient of kinetic friction between the block and the table is 0.13?
Let us assume that pulley is mass less.
Let the tension produced at both ends of the pulley is T.
We are asked to calculate the acceleration of the block.
Let the masses of two bodies are denoted as [tex]m_{1} \ and\ m_{2}\ respectively[/tex]
[tex]Let\ m_{1} =1 kg\ and\ m_{2} =2 kg[/tex]
As per this diagram, the body having mass 1 kg is moving downward and the body having mass 2 kg is moving on the surface of the table.
Let the acceleration of each block is a .
For body having mass 1 kg:
The net force acting on 1 kg body will be-
[tex]m_{1} g-T=m_{1} a[/tex] [1]
Here tension in the rope will be vertically upward and weight of the body will be in vertical downward direction.
For body having mass 2 kg:
The coefficient of kinetic friction [tex][\mu]=0.13[/tex]
[tex]Hence\ the\ frictional\ force\ F=\mu N[/tex]
[tex]F=\mu m_{2} g[/tex]
Hence the net force acting on the body having mass 2 kg-
[tex]T-\mu m_{2} g=m_{2} a[/tex] [2]
Here the tension of the rope is towards right i.e along the direction of motion of the 2 kg block and frictional force is towards left.
Combining 1 and 2 we get-
[tex]m_{1} g-T=m_{1}a[/tex] [1]
[tex]T-\mu m_{2}g= m_{2} a[/tex] [2]
---------------------------------------------------
[tex][m_{1} -\mu m_{2} ]g=[m_{1} +m_{2} ]a[/tex]
[tex]a=\frac{m_{1}-\mu m_{2}} {m_{1}+ m_{2}}*g[/tex]
[tex]a=\frac{1-[2*0.13]}{1+2} *9.8\ m/s^2[/tex]
[tex]a=\frac{0.74}{3} *9.8\ m/s^2[/tex]
[tex]a=2.417 m/s[/tex] [ans]
The acceleration of a block subject to kinetic friction is determined by subtracting the force of friction from the gravitational force parallel to the surface and then dividing by the mass of the block. The force of friction is calculated by multiplying the normal force by the coefficient of kinetic friction.
Explanation:The acceleration of a block sliding on a surface with kinetic friction can be found by using Newton's second law, F = m*a, where F is the net force acting on the object, m is the mass, and a is the acceleration. Given that the coefficient of kinetic friction between the block and the table is 0.13, we first need to find the force of friction, which is the product of the coefficient of kinetic friction (μk) and the normal force (N). Assuming that the only forces acting on the block are gravity, the normal force, and friction, the force of friction can be subtracted from the component of the gravitational force along the inclined plane to get the net force. The net force is then divided by the mass of the block to obtain the acceleration.
To solve for acceleration, the following equations are generally used: Ffriction = μk * N and a = (Fgravity, parallel - Ffriction) / m. It's important to note that without the mass of the block or further details of the scenario, we cannot calculate a numeric answer.
Learn more about acceleration here:https://brainly.com/question/12550364
#SPJ3
Surface waves move only in a back and forth motion.
True
False
What two forces can act on an object without touching it??
two campers pull a canoe. If the force of friction acting on the canoe is 84 N, then how much work does the two campers need to do to keep the canoe in the middle of the river for a displacement of 50 m?
The work done by the two campers against frictional force is 4200 Joule.
What is force?The definition of force in physics is: the push or pull on a mass-containing item changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
Frictional force acting on the he canoe: F = 84 N.
Displacement of the canoe: d = 50 m.
Hence, work done by the two campers against frictional force = force × displacement
= 84 N × 50 m
= 4200 Joule.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ3
Concave lens cause rays to _____.
A. come together
B. reflect
C. spread apart
What is newton's first law of motion?
Answer:
If a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.
Explanation:
What method of heat transfer does heat energy use to reach earth from the sun?
Answer: Radiation
Explanation:
Heat transfer through radiation. Radiation is one of the mode of heat transfer and is the transfer of heat from one body to another without passing through any intervening medium. It is the heat energy directly from the sun. This energy reaches the earth directly without obstruction.
As the wave interacts with a wall, which kind of wave interaction is shown?
absorption
diffraction
refraction
reflection
The kind of wave interaction shown here is reflection.
What is meant by reflection ?
Reflection is the defined as the phenomenon by which a wave bounces back when it his on a medium or a plane.
Here,
The wave is shown as incident on the wall after that it is bounced back from the surface of the wall. Since, the wave is bounced back from the surface, we can say the wave interaction happened here is reflection. The surface of the wall here acts as the reflecting surface.
The wave that incident on the surface of the wall is called the incident wave. The wave that bounced back from the surface is called reflected wave.
If we draw a perpendicular line on the reflecting surface, it can be called the normal.
According to law of reflection, the incident wave, the reflected wave and the normal, all of them lies in the same plane. Here we can see that all of them are on the same plane. So, the law of reflection is valid in this situation.
Also, here only the direction of the wave is changed, which is the property of reflection.
Hence,
The kind of wave interaction shown here is reflection.
To learn more about reflection, click:
https://brainly.com/question/2723345
#SPJ7
Which of the following statements is true about solar eclipses?
There is a solar eclipse every month.
All solar eclipses are total.
Some solar eclipses are not total.
There can be 12 solar eclipses in a single year.
A basketball player, who weighs 600 newtons, jump 0.5 meters vertically off the floor. Calculate her kinetic energy just before hitting the floor.
a)300J
b)3000J
c)9.81m/s^2
d)0
Answer:
300 J
Explanation:
[tex]v = \sqrt{2gh}[/tex]
[tex]KE = \frac{1}{2}mv^{2}[/tex]
——
[tex]v = \sqrt{2(9.81 m/s^{2})(0.5 m)}\\ v = 3.13[/tex]
[tex]KE = \frac{1}{2}(61.2 kg)(3.13 m/s)^{2}\\ KE = 300 J[/tex]
Kinetic energy of an object is calculated from its mass and velocity. The mass of the player is 61.2 g and the velocity is 3.13 m/s. Then the kinetic energy of the basketball player is 300 J.
What is kinetic energy?Kinetic energy of an object is generated by virtue of its motion. Kinetic energy depends on the mass and velocity of the body by the expression:
K = 1/2 mv².
Given the weight = 600 N
mass = 600 N/9.8 m/s²= 61.2 kg
height = 0.5 m
velocity = √2gh
= √(2×9.8 m/s² × 0.5 m ) = 3.13 m/s
Then, kinetic energy of the player = 1/2 61.2 kg × 3.13 × 3.13
k = 300 J.
Therefore, the kinetic energy of the basketball player is 300 J.
Find more on kinetic energy:
https://brainly.com/question/15764612
#SPJ2
If the kinetic and potential energy in a system are equal, then the potential energy increases. What happens as a result?
If potential energy in a system increases while its total mechanical energy remains constant, kinetic energy decreases equivalently. This exchange between kinetic and potential energy is an example of the conservation of mechanical energy. Changes in internal energy may also manifest as a change in temperature or energy within the system's structure.
When the potential energy in a system increases without a change in the mechanical energy (assuming no energy is lost to friction), the kinetic energy would decrease equivalently to conserve the total mechanical energy of the system. This is in accordance with the principle of conservation of energy. If an object, for example, is at a certain height above the ground and it is raised further, its potential energy increases due to its position. Consequently, if the object is in free fall, as the potential energy decreases, the kinetic energy increases until the object reaches ground level, where potential energy is at its minimum while kinetic energy is at its maximum.
When the potential energy in a system increases with kinetic energy being equal, it means the internal energy of the system is rising. This increase can be due to an increase in internal potential energy, internal kinetic energy, or both. The work done on the system equals the increase in internal energy.
Moreover, any increase in a system's internal energy that does not result in elevation or speed gain could translate to an increase in internal potential energy or internal kinetic energy, or both. An increase in the internal kinetic energy would generally be observed as an increase in temperature, while an increase in internal potential energy might be observed as energy stored within the structural or molecular configuration of the system.
If we apply this to the scenario of a child on a swing, as the child swings downward, the potential energy (due to height) decreases while kinetic energy increases. Conversely, as the child swings upward, the kinetic energy decreases and potential energy increases.
Which of the following statements is true about the nature of light?
A. Light behaves entirely as a particle
B. Light has properties of both particles and waves
C. Light behaves entirely as a wave
D. Light travels as a wave but does not carry energy ...?
Answer: The correct answer is "Light has properties of both particles and waves".
Explanation:
Light shows dual nature. It behaves as particle as well as waves.
Photoelectric effect is the phenomenon in which there is an emission of the electrons when the light of the particular frequency is incident on the surface of the metal.
The particle nature of the light is shown by photoelectric effect.
Reflection: Reflection is the phenomenon in which the light wave gets reflected from the surface without getting transmitted. It bounces back from the surface.
The wave nature of the light is shown by reflection.
Therefore, the correct option is (B).
If 3000ft/3 of air crossing an evaporator coil and is cooled from 75F to 55F, what would be the volume of air,in ft/3, exiting the evaporator coil?
The volume of air remains the same before and after passing the evaporator coil, which is 3000 ft³, as change in temperature does not affect the volume of air assuming constant pressure and amount of air.
Explanation:Given that the question is related to air volumes in relation to temperature changes, here we won't experience a change in volume of air due to the cooling process. According to the ideal gas law, assuming constant pressure and amount of air, a decrease in temperature does not change the volume of the air. Therefore, the volume of the air exiting the evaporator coil is still the same as the volume that entered it, which is 3000 ft³.
Learn more about Gas Volume and Temperature Relation here:https://brainly.com/question/32948592
#SPJ12
To find the volume of air exiting the evaporator coil, you can use the ideal gas law. Plugging in the given values, the volume of air exiting the evaporator coil would be 2200 ft³.
Explanation:To find the volume of air exiting the evaporator coil, we can use the principle of conservation of mass. The initial volume of air is given as 3000 ft³ and the final temperature is 55°F. We can assume that the air behaves ideally, so we can use the ideal gas law to solve for the final volume of air.
Using the ideal gas law:
V1/T1 = V2/T2
Where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume, and T2 is the final temperature.
Plugging in the values:
V2 = (V1 * T2) / T1 = (3000 ft³ * 55°F) / 75°F = 2200 ft³
Therefore, the volume of air exiting the evaporator coil would be
2200 ft³
.
Learn more about Ideal Gas Law here:https://brainly.com/question/30458409
#SPJ2
Which country was the first in the world to launch a mass media campaign in response to population growth?
A)India
B)China
C)Kenya
D)Australia
A roller-coaster car has a mass of 1200 kg when fully
loaded with passengers. As the car passes over the top of a circular
hill of radius 18 m, its speed is not changing. At the top of the
hill, what are the (a) magnitude FN and (b) direction (up or
down) of the normal force on the car from the track if the car’s
speed is v 11 m/s? What are (c) FN and (d) the direction if v
14 m/s?
Final answer:
At the top of the hill, the roller-coaster car experiences a normal force (FN) from the track that is equal to the gravitational force (mg). The direction of the normal force at the top of the hill is downwards. When the car's speed increases to 14 m/s, the magnitude of the normal force remains the same, but its direction stays downwards.
Explanation:
To determine the magnitude of the normal force (FN) and its direction at the top of the hill, we need to consider the forces acting on the roller-coaster car. At the top of the hill, the car's speed is not changing, meaning its acceleration is zero. This means that the net force acting on the car is zero. The only forces acting on the car at the top of the hill are the gravitational force (mg) and the normal force (FN) from the track.
(a) When the car's speed is 11 m/s, we can equate the gravitational force and the normal force:
mg = FN
Using the given mass of 1200 kg, we can calculate the magnitude of the normal force:
FN = mg = 1200 kg * 9.8 m/s^2 = 11760 N
(b) The direction of the normal force at the top of the hill is downwards (towards the center of the circular path), as it opposes the gravitational force pulling the car downwards.
(c) When the car's speed is 14 m/s, the magnitude of the normal force remains the same:
FN = mg = 1200 kg * 9.8 m/s^2 = 11760 N
(d) The direction of the normal force at the top of the hill is still downwards, as it continues to oppose the gravitational force.
(a) At a speed of [tex]\(v = 11 \ m/s\)[/tex], the magnitude of the normal force [tex](\(F_N\))[/tex] on the roller-coaster car at the top of the hill is [tex]\(9810 \ N\)[/tex] (upward).
(b) At a speed of [tex]\(v = 14 \ m/s\)[/tex], the magnitude of the normal force [tex](\(F_N\))[/tex] on the roller-coaster car at the top of the hill is [tex]\(7560 \ N\)[/tex] (downward).
Explanation:In circular motion, at the top of the hill, the centripetal force required to keep the car moving in a circular path is provided by the normal force [tex](\(F_N\)). At \(v = 11 \ m/s\)[/tex], the net force is zero as the car's speed is constant, so [tex]\(F_N\)[/tex] equals the gravitational force [tex](\(mg\))[/tex], resulting in [tex]\(F_N = 9810 \ N\)[/tex] (upward). This is because the normal force opposes the gravitational force and provides the centripetal force needed.
At [tex]\(v = 14 \ m/s\)[/tex], the normal force is directed downward. In this case, the centripetal force is greater than the gravitational force, leading to a net force directed toward the center of the circular path. The normal force now includes both the gravitational force [tex](\(mg\))[/tex] and the additional force required for centripetal acceleration. The magnitude of [tex]\(F_N\) is \(7560 \ N\)[/tex], and it is directed downward as the net force acts in the opposite direction to the gravitational force.
Understanding the dynamics involves recognizing that at different speeds, the balance between gravitational force and the force required for circular motion changes. At lower speeds, the normal force opposes gravity, while at higher speeds, it supplements gravity to provide the necessary centripetal force.
Gravitational force between two objects depends on
Answer:
SIZE AND DISTANCE BETWEEN THEM
This is a depiction of 2 forces acting on a puck (top view). Which direction would a 3rd force have to be to balance the forces? [picture below]
two crates, of mass 75kg and 110 kg are in contact and at rest on a horizontal surface. a 730 N force is exerted on a 75kg crate. if the coefficient of kinetic friction is 0.15, calculate (a) the acceleration of the system and (b) the force that each crate exerts on the other.
...?
To calculate the acceleration of the system, use Newton's second law of motion. The force exerted by each crate on the other is equal and opposite.
Explanation:To calculate the acceleration of the system, we need to use Newton's second law of motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration. The net force acting on the system is the applied force minus the force of friction. So, the acceleration of the system can be calculated as:
Net force = Applied force - Force of friction
F_net = F_applied - F_friction
The force of friction can be calculated using the formula:
Force of friction = coefficient of friction * Normal force
Now, to calculate the force that each crate exerts on the other, we need to consider that the force exerted by one crate on another is equal in magnitude but opposite in direction. So, if we know the force exerted by one crate on the other, we can simply use Newton's third law of motion to find the force exerted by the other crate on the first crate.
Learn more about Newton's laws of motionhttps://brainly.com/question/2272832
#SPJ3