Final answer:
To find the number of moles of nitrogen in 0.215 g of N2O, calculate the molar mass of N2O (44 g/mol), then use the mass to calculate the moles of N2O. Finally, multiply by 2 since there are two nitrogen atoms per molecule of N2O, resulting in approximately 0.00978 moles of nitrogen.
Explanation:
To calculate the number of moles of nitrogen in 0.215 g of N2O, we first need the molar mass of N2O. The formula N2O contains two nitrogen atoms (N) and one oxygen atom (O). Since N has a molar mass of 14 g/mol, and O has a molar mass of 16 g/mol, the molar mass of N2O is calculated as:
[tex](2 mol N) times (14 g/mol) + (1 mol O) times (16 g/mol) = 28 g/mol + 16 g/mol = 44 g/mol.[/tex]
Next, we use the formula:
Number of moles (n) = mass (m) / molar mass (M)
n = 0.215 g / 44 g/mol
Therefore, the moles of N2O in 0.215 g is calculated as approximately:
n = 0.00489 moles of N2O
To find the number of moles of nitrogen (N) in N2O, we need to remember that each molecule of N2O contains two atoms of nitrogen, so we multiply the moles of N2O by 2:
n(N) = 0.00489 moles of N2O
n(N) = 0.00978 moles of nitrogen
What effect does the use of an uncalibrated thermometer have on the boiling point?
Which of the following substances is a compound
A compound in chemistry is a substance that is formed when two or more elements are chemically bound together, with fixed ratios of the elements. Examples include water (H2O) and carbon dioxide (CO2).
Explanation:In chemistry, a compound is a substance formed when two or more elements are chemically bound together. A given compound will always contain the same elements in fixed ratios. For instance, water (H2O) is a compound because it is made of two hydrogen atoms and one oxygen atom. Similarly, carbon dioxide (CO2) is a compound composed of one carbon atom and two oxygen atoms. Therefore, the identification of a substance as a compound depends on its elemental composition.
A compound is a substance made up of two or more different elements chemically bonded together. From the given options, the substance that is a compound is sodium chloride (NaCl). This is because sodium chloride is formed by the chemical bond between sodium (Na) and chlorine (Cl). It has a fixed ratio of sodium to chlorine atoms, and its properties are different from those of the individual elements.
Learn more about Compound here:https://brainly.com/question/34151797
#SPJ6
Which of the following are true about marijuana
All of the given options are true about marijuana (option D)
Why is this correct?
The primary psychoactive component in marijuana, THC, disrupts intercellular communication within the brain, notably affecting regions associated with memory and learning. Studies indicate that marijuana consumption can result in challenges with concentration, memory retention, and acquiring new knowledge.
THC has the capacity to engage with the brain's fear and anxiety hub, potentially inducing sensations of paranoia, anxiety, and, in severe cases, panic attacks. This tendency is amplified among individuals with pre-existing anxiety conditions or those consuming high doses of THC.
While not as inherently addictive as certain other substances, marijuana still holds the potential for habit formation. Regular usage can lead to dependence, marked by withdrawal symptoms such as irritability, anxiety, and sleep disturbances upon cessation of use.
Complete question:
Which of the following are true about marijuana: A. It can impair learning and memory B. It can bring upon panic attacks or anxiety C. It can become addictive D. All of the above
What is the ph of a solution made by combining 157 ml of 0.35 m nac2h3o2 with 139 ml of 0.46 m hc2h3o2? the ka of acetic acid is 1.75 × 10-5?
What are [Ba2+] and [CrO42−] in a saturated BaCrO4 solution if the Ksp of BaCrO4 is 1×10−10?
[Ba2+] =
[CrO42−] =
Final answer:
The concentrations of[tex]Ba^{2+} and CrO_4^{2-[/tex] in a saturated solution of BaCrO4 with a Ksp of 1×10^{−10} are both 1×10^{−5} M.
Explanation:
The student asked about the concentrations of [tex]Ba^{2+} and CrO_4^{2-[/tex] in a saturated solution of barium chromate (BaCrO4) given that the solubility product constant (Ksp) is 1×10−10. In a saturated solution, the ions Ba2+ and CrO42− would be present in equal molar amounts, as the dissolution of BaCrO4 produces one of each ion. Hence, the Ksp equation for this dissolution is [tex]K_{sp} = [Ba^{2+}][CrO_4^{2-}][/tex]. Since both ions are in a 1:1 ratio, we can set [tex][Ba^{2+}] = [CrO_4^{2-}] = x[/tex]. Therefore, Ksp = x·x = x2 = 1×10^−10, and solving for x gives x = √(1×10^−10) = 1×10^−5M. This is the concentration of both Ba2+ and [tex]CrO_4^{2-[/tex] in the saturated solution.
NaCl + H2O → NaOH + Cl2 + H2 How many grams of chlorine gas, Cl2 are given off if 7.5 grams of sodium chloride, NaCl, are decomposed? Is this equation balanced?
Suppose that the average speed (vrms) of carbon dioxide molecules (molar mass 44.0 g/mol) in a flame is found to be 1.90 105 m/s. what temperature does this represent? g
What are the net ionic equations for:
Ni(No3)2(aq) + Na2S(aq) = NiS(s) + 2 NaNo3(aq)
KBr(aq) + NaNO3(aq) = KNO3(s) + NaBr(aq)
Li2SO4(aq) + BaCl2(aq) = BaSO4(s) + 2 LiCl(aq)
Explanation :
In the net ionic equations, we are not include the spectator ions in the equations.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
(a) The given balanced ionic equation is,
[tex]Ni(NO_3)_2(aq)+Na_2S(aq)\rightarrow NiS(s)+2NaNO_3(aq)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]Ni^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+S^{2-}(aq)\rightarrow NiS(s)+2Na^+(aq)+2NO_3^-(aq)[/tex]
In this equation, [tex]Na^+\text{ and }NO_3^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]Ni^{2+}(aq)+S^{2-}(aq)\rightarrow NiS(s)[/tex]
(b) The given balanced ionic equation is,
[tex]NaNO_3(aq)+KBr(aq)\rightarrow KNO_3(s)+NaBr(aq)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]Na^+(aq)+NO_3^-(aq)+K^+(aq)+Br^-(aq)\rightarrow KNO_3(s)+Na^+(aq)+Br^-(aq)[/tex]
In this equation, [tex]Na^+\text{ and }Br^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]NO_3^-(aq)+K^+(aq)\rightarrow KNO_3(s)[/tex]
(c) The given balanced ionic equation is,
[tex]Li_2SO_4(aq)+BaCl_2(aq)\rightarrow BaSO_4(s)+2LiCl(aq)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]2Li^+(aq)+SO_4^{2-}(aq)+Ba^{2+}(aq)+2Cl^-(aq)\rightarrow BaSO_4(s)+2Li^+(aq)+2Cl^-(aq)[/tex]
In this equation, [tex]Li^+\text{ and }Cl^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]SO_4^{2-}(aq)+Ba^{2+}(aq)\rightarrow BaSO_4(s)[/tex]
The element that has a valence configuration of 2s2 is ________.
Answer: The element having given valence electronic configuration is beryllium.
Explanation:
Electronic configuration is defined as the representation of electrons around the nucleus of an atom. Number of electrons in an atom are determined by the atomic number of that atom.
Valence electrons are defined as the electrons present in the outermost shell of an atom.
We are given:
Valence electronic configuration of an atom = [tex]2s^2[/tex]
So, the actual electronic configuration of atom will be [tex]1s^22s^2[/tex]
Total number of electrons = 2 + 2 = 4
So, the atomic number of given element is 4 and the element is beryllium
Hence, the element having given valence electronic configuration is beryllium.
how much sodium chloride must be added to 100 mL of water so that its concentration is 20 parts per million assume that the density of water is 1.00g/ml
Why might a chemist add a buffer to a solution?
Chemists add buffers to solutions to stabilize pH levels, critical for maintaining the proper environment for chemical and biological processes. Buffers resist pH changes by balancing the effects of added acids or bases through weak acids or bases and their salts.
A chemist might add a buffer to a solution to maintain a stable pH when acids or bases are added. This is critical because many chemical reactions and biological processes require a consistent pH to function properly. Buffers work by utilizing a weak acid or base and their corresponding salts to neutralize added acids or bases without significantly changing the solution's pH. For instance, a buffer system can consist of acetic acid and sodium acetate; the acetic acid can react with any added base, while the sodium acetate reacts with any added acid, both acting to dampen fluctuations in pH levels.
In biological systems, for example, buffers help maintain conditions that are necessary for enzyme function and cellular processes. There are practical limits to buffer concentrations due to the potential formation of unwanted precipitates and the tolerance of the system to dissolved salts.
Another important role of buffers includes calibration in analytical chemistry. Adding substances like Na2SO4 to a buffer can adjust ions' concentrations that are crucial for the accuracy of a calibration curve, which is especially useful in detecting low concentrations of certain compounds.
The rates of which reactions are increased when the temperature is raised?
a. endothermic reactions only
b. both endothermic reactions and exothermic reactions
c. exothermic reactions only
d. depends on the value of delta h not the sign
We have that the he rates of which reactions are increased when the temperature is raised is endothermic reactions only
Option A
Endothermic ReactionGenerally, the rates of which reactions are increased when the temperature is raised is an Endothermic reaction only
This assertion lies on the basis of the fact that Endothermic reaction requires a net gain of energy for reaction
For more information on temperature visit
https://brainly.com/question/13439286
An archeological artifact was subjected to radiocarbon dating. the artifact showed a carbon-14 decay rate of 13.8 disintegrations/min per gram of carbon. carbon-14 has a half-life of 5715 years, and currently living organisms decay at the rate of 15.3 disintegrations/min per gram of carbon. what is the approximate age of the artifact?
A solution contains 0.10 m sodium cyanide and 0.10 m potassium hydroxide. solid zinc acetate is added slowly to this mixture. what is the formula of the substance that precipitates first?
From the solubility products of the solutes produced, the Ksp of {Zn(OH)₂ is less than the Ksp of Zn(C_N)₂, Zn(OH)₂ precipitates first.
What is solubility product? Ksp of a solute?The solubility product, Ksp of a solute is the product of the ions produced when a solute dissociates into ions when dissolved in a solvent.
The higher the Ksp of a solute, the more soluble it is ain a solvent.
The equation of the reaction of zinc acetate with each of the solutions as well their solubility products is given below:
[tex] Zn(CH₃COO)₂(s) + 2KOH(aq) \rightarrow Zn(OH)₂(s) + 2CH₃COOK(aq) \\ [/tex]
[tex]Ksp \: {Zn(OH)₂}=1.2*10^{-17}[/tex]
[tex]Zn(CH₃COO)₂(s) + 2NaC \: N(aq) \rightarrow Zn(C \: N)₂(s) + 2CH₃COONa(aq) \\ [/tex]
[tex]Ksp \: {Zn(C \: N)₂}=2.6*10^{-13}[/tex]
Therefore, since the Ksp of Zn(OH)₂ is less than the Ksp of Zn(C_N)₂, Zn(OH)₂ precipitates first.
Learn more about solubility product at: https://brainly.com/question/23946616
Find the number of moles of water that can be formed if you have 182 mol of hydrogen gas and 86 mol of oxygen gas.
What is the IUPAC name for the following compound (problem C)
The mentioned compound's IUPAC name depends on its structure. It could be named as 'ethoxyethane' if it contains an ethoxy group attached to an ethane chain. Similarly, a molecule with chlorine atoms attached to the 2nd and 3rd carbon would be named '2,3-dichloropentane'.
Explanation:The IUPAC name for the mentioned compound depends on its structure, but given the examples, if it’s a molecule made up of an ethoxy group attached to an ethane chain, then its IUPAC name would be ethoxyethane. If the molecule is a substituted alkane with chlorine atoms attached on the 2nd and 3rd carbon, the name would be 2,3-dichloropentane. It's also noteworthy that the IUPAC adopted new nomenclature guidelines in 2013 that require the place number of substituents to be put as an “infix” rather than a prefix, which should be considered as well.
Learn more about IUPAC Nomenclature here:https://brainly.com/question/14379357
#SPJ6
A student collected nitrogen by displacing water in a graduated cylinder. the atmospheric pressure was 738.9 mmhg; the height of the water remaining in the cylinder was 13.2 mm; the partial pressure of the water was 18.8 mmhg. determine the partial pressure of the nitrogen in the cylinder. the density of mercury is 13.6 g/m
Rank the size of a change in temperature of one degree Fahrenheit, one degree Celsius, and one kelvin. In other words, if a thermometer were to show that the temperature outside increased by these amounts, which change would feel the largest? If any of the options are the same magnitude, stack them above one another. Rank the sizes of one degree in each scale from largest to smallest. To rank items as equivalent, overlap them.
Balance the following equation with the smallest whole number coefficients. Choose the answer that is the sum of the coefficients in the balanced equation. Do not forget coefficients of "one."
Cr2(SO4)3 + RbOH Cr(OH)3 + Rb2SO4
(a) 10
(b) 12
(c) 13
(d) 14
(e) 15
The sum of the coefficients in the balanced chemical equation Cr2(SO4)3 + RbOH → Cr(OH)3 + Rb2SO4 is 24. No listed options match the sum.
Explanation:To balance the given equation, you must first count the number of each type of atom on both sides of the equation and then use coefficients to balance the numbers of each atom on both sides.
The correctly balanced chemical equation is 2Cr2(SO4)3 + 12RbOH → 4Cr(OH)3 + 6Rb2SO4.
Now, add these coefficients: 2 (for Cr2(SO4)3), 12 (for RbOH), 4 (for Cr(OH)3), and 6 (for Rb2SO4). The sum of the coefficients in the balanced equation is 2 + 12 + 4 + 6 = 24.
None of the options given match the sum of the coefficients in the balanced equation.
https://brainly.com/question/29233369
#SPJ2
Given the formula m1v1=m2v2, where m indicates concentration and v indicates volume, which equation represents the correct way to find the concentration of the dilute solution (m2)?
M₂ = (M₁V₁) / V₂
Further explanationDilution represents the addition of a solvent (water) without adding solutes. In dilution, the mole of the solute remains, so the concentration of the solution will drop.
When calculating dilution factors, the units of volume and concentration must remain consistent.
Dilution calculations can be typically performed following the formula:
[tex]\boxed{ \ M_1V_1 = M_2V_2 \ }[/tex].
with,
V₁ and V₂ as volume before and after dilutionM₁ and M₂ as the molarity of the solution before and after dilution.The equation which represents the correct way to find the concentration of the dilute solution (M₂) is
[tex]\boxed{ \ M_2 = \frac{M_1V_1}{V_2} \ }[/tex].
_ _ _ _ _ _ _ _ _ _
Example:
How much must be dissolved to carry out 5 liters of 0.4 M methanol solution? How much water do you require adding?
M₁ = 25 MV₂ = 5 LM₂ = 0.4 MV₁ = ?[tex]\boxed{ \ V_1 = \frac{M_2V_2}{M_1} \ }[/tex]
[tex]\boxed{ \ V_1 = \frac{0.4 \times 5}{25} \ }[/tex]
[tex]\boxed{ \ V_1 = \frac{0.4}{5} \ }[/tex]
[tex]\boxed{ \ V_1 = \frac{0.8}{10} \ }[/tex]
[tex]\boxed{ \ V_1 = \frac{8}{100} \ }[/tex]
Thus we have 0.08 L or 80 mL of 25 M methanol solution.The amount of water that needs to be added is 5 L - 0.08 L = 4.92 L or 492 mL._ _ _ _ _ _ _ _ _ _
Notes:
A solution consists precisely of a solute and a solvent. There are several ways to properly express the concentration of a solution, one of which is molarity. Molarity is also known as molar concentration with the symbol unit M or molar or mole/L.The molarity (M) of a solution is calculated by allowing the moles of solute and divided by the number of liters of solution.[tex]\boxed{ \ molarity = \frac{moles \ of \ solute}{liters \ of \ solution} \ }[/tex]
Learn moreTo make a 0.500 M solution, one could take 0.500 moles of solute and add? https://brainly.com/question/10278982 The molality and mole fraction of water https://brainly.com/question/10861444 How many liters of the 50% solution and how many liters of the 90% solution will be used? https://brainly.com/question/13034221M₂ = (M₁V₁) / V₂ is the equation which represents the correct way to find the concentration of the dilute solution.
In chemistry, concentration is the ratio of solute to solvent or solution in a given volume. The amount of material in various solutions is quantified and compared using this crucial characteristic. Chemistry requires concentration in many different areas, such as chemical reactions, analyte detection, and solution preparation. Concentration can be expressed in a number of different ways, including molarity (M), mass/volume percent (%), parts per million (ppm), and mole fraction. Depending on the needs of the experiment or application, each approach offers a distinctive viewpoint on the solute concentration in a solution and is applied in various situations.
M₂ V₂= (M₁V₁)
M₂ = (M₁V₁) / V₂
To know more about concentration, here:
https://brainly.com/question/30862855
#SPJ6
What would be the resulting molarity of a solution made by dissolving 25.4 grams of KOH in enough water to make a 985-milliliter solution? Show all of the work needed to solve this problem.
Two different compounds are obtained by combining nitrogen with oxygen. the first compound results from combining 46.7 g of n with 53.3 g of o, and the second compound results from combining 17.9 g of n and 82.0 g of o. calculate the ratio of the mass ratio of o to n in the second compound to the mass ratio of o to n in the first compound. express your answer numerically.
The mass ratio of oxygen to nitrogen in the first compound is 1.1413, and in the second compound, it is 4.5810. The ratio of these mass ratios is approximately 4.015.
Explanation:The question involves calculating the mass ratio of oxygen to nitrogen for two nitrogen-oxygen compounds and then finding the ratio of these mass ratios.
For the first compound:
Mass of O: 53.3 g
Mass of N: 46.7 g
Mass ratio of O to N: 53.3 g / 46.7 g = 1.1413
For the second compound:
Mass of O: 82.0 g
Mass of N: 17.9 g
Mass ratio of O to N: 82.0 g / 17.9 g = 4.5810
Now, we calculate the ratio of the mass ratio of the second compound to that of the first compound:
4.5810 / 1.1413 = 4.015
Therefore, the ratio of the mass ratio of oxygen to nitrogen in the second compound to the first one is approximately 4.015.
If a buffer solution is 0.120 M in a weak acid (Ka = 2.0 × 10-5) and 0.440 M in its conjugate base, what is the pH?
To find the pH of the buffer solution, the Henderson-Hasselbalch equation is used with the provided concentrations of weak acid and conjugate base, yielding a pH value of approximately 5.26.
Explanation:To calculate the pH of the buffer solution containing a weak acid and its conjugate base, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pKa is the negative logarithm of the acid dissociation constant (Ka), [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
Given that the weak acid concentration is 0.120 M its conjugate base concentration is 0.440 M, and the Ka for the weak acid is 2.0 × 10^-5, we first calculate pKa:
pKa = -log(Ka) = -log(2.0 × 10^-5) = 4.70
Next, we use the Henderson-Hasselbalch equation:
pH = 4.70 + log(0.440/0.120) = 4.70 + log(3.667) ≈ 4.70 + 0.564 = 5.264
The pH of the buffer solution is therefore approximately 5.26.
Final answer:
To calculate the pH of the buffer solution, first determine the pKa from the given Ka and then apply the Henderson-Hasselbalch equation using the concentrations of the weak acid and its conjugate base. The pH of the given buffer solution is approximately 5.27.
Explanation:
The pH of a buffer solution can be determined using the Henderson-Hasselbalch equation, which is pH = pKa + log(·[A−]/[HA]·), where [A−] is the concentration of the conjugate base and [HA] is the concentration of the acid. In this case, the weak acid has a given Ka value of 2.0 × 10⁻µ, which allows us to calculate its pKa as the negative logarithm of Ka (pKa = -log(Ka)).
First, calculate the pKa:
pKa = -log(Ka)
= -log(2.0 × 10⁻µ)
= 4.70
Now, apply the Henderson-Hasselbalch equation:
pH = pKa + log([A−]/[HA])
= 4.70 + log(0.440 M/0.120 M)
= 4.70 + log(3.67)
= 4.70 + 0.565
= 5.265
Therefore, the pH of the buffer solution is approximately 5.27.
Now consider lithium (LI+) and fluoride (F2) as oxidizing agents. How do these compare as oxidizing agents?
Answer:
Fluoride is a stronger oxidizing agent than lithium.
Explanation:
What is the [h3o+] at equilibrium of a 0.50 m weak acid (ha) solution if the ka of the acid is 4.6 × 10−4?
Answer : The concentration of [tex]H_3O^+[/tex] at equilibrium is, 0.015 M
Solution :
The balanced equilibrium reaction will be,
[tex]HA+H_2O\rightleftharpoons H_3O^++A^-[/tex]
The expression for dissociation constant of weak aciod will be,
[tex]k_a=\frac{[H_3O^+]\times [A^-]}{[HA]}[/tex]
where,
[tex]k_a[/tex] = dissociation constant of weak acid
Let the concentration of [tex]H_3O^+[/tex] and [tex]A^-[/tex] be 'x'
Now put all the given values in this expression, we get
[tex]4.6\times 10^{-4}=\frac{(x)\times (x)}{0.50}[/tex]
[tex]x=0.015M[/tex]
The concentration of [tex]H_3O^+[/tex] = [tex]A^-[/tex] = x = 0.015 M
Therefore, the concentration of [tex]H_3O^+[/tex] at equilibrium is, 0.015 M
The most probable mechanism of reactivity for the solvolysis of 2-chloro-norbornane is
The rate determining step for the reactivity for the solvolysis of 2-chloro-norbornane depends only on the decomposition of a single molecular species which is the 2-chloro-norbornane itself. For unimolecular reactions, the mechanism pathway being followed is that of an SN1 mechanism.
Answer:
SN1 mechanism
Write a net ionic equation for the overall reaction that occurs when aqueous solutions of potassium hydroxide and phosphoric acid are combined. assume excess base.
The net ionic equation for overall reaction is 2 KOH(aq) + H₃PO₄(aq) → K₂HPO₄(aq) + 2 H₂O(l)
Kalium hydroxide (KOH) and phosphoric acid (H₃PO₄) in water react to form potassium hydrogen phosphate (K₂HPO₄) and water. The balanced chemical equation for this reaction is:
2 KOH(aq) + H₃PO₄(aq) → K₂HPO₄(aq) + 2 H₂O(l).
In this process, potassium hydroxide contributes OH⁻ to phosphoric acid, which donates H⁺. The hydroxide and hydrogen ions produce water molecules. In the meantime, the remaining ions, K⁺ and HPO₄²⁻, create potassium hydrogen phosphate.
Since potassium hydroxide is a strong base and phosphoric acid is weak, the reaction completes, yielding the products. This net ionic equation simplifies the process by concentrating on chemical change species.
Learn more about ionic equation, here:
https://brainly.com/question/15466794
#SPJ12
The net ionic equation for the reaction between potassium hydroxide and phosphoric acid, with excess base, is H3PO4(aq) + 3OH-(aq) → 3H2O(l) + PO4^3-(aq).
Explanation:When aqueous solutions of potassium hydroxide (KOH) and phosphoric acid (H3PO4) are combined, the hydroxide ions (OH-) from the strong base KOH will react with the hydrogen ions (H+) from the weak acid H3PO4 to form water (H2O) and the phosphate ion (PO43-). Given the excess base, we will see the complete neutralization of H3PO4. The net ionic equation, considering H3PO4 does not fully dissociate, is as follows:
H3PO4(aq) + 3OH-(aq) → 3H2O(l) + PO43-(aq)
The key to writing the net ionic equation is recognizing that the potassium ions (K+) and excess hydroxide ions (OH-) remain in solution and thus are spectator ions, not part of the net ionic equation.
https://brainly.com/question/35304253
#SPJ3
Calculate the ph of a 0.20 m solution of kcn at 25.0 ∘c. express the ph numerically using two decimal places
The pH of a 0.20 M solution of KCN is [tex]\boxed{11.31}[/tex].
Further Explanation:
pH is used to describe acidity or basicity of substances. Its range varies from 0 to 14. It is defined as negative logarithmof hydrogen ion concentration.
The expression for pH is mentioned below.
[tex]{\text{pH}} = - \log \left[ {{{\text{H}}^ + }} \right][/tex] …… (1)
Where [tex]\left[ {{{\text{H}}^ + }}\right][/tex] is the concentration of hydrogen ion.
Dissociation reaction of KCN is as follows:
[tex]{\text{KCN}} \to {{\text{K}}^ + } + {\text{C}}{{\text{N}}^ - }[/tex]
Cyanide ions thus formed can react with water to form HCN and [tex]{\text{O}}{{\text{H}}^ - }[/tex] as follows:
[tex]{\text{C}}{{\text{N}}^ - } + {{\text{H}}_{\text{2}}}{\text{O}} \rightleftharpoons {\text{HCN}} + {\text{O}}{{\text{H}}^ - }[/tex]
The relation between [tex]{{\text{K}}_{\text{w}}}[/tex], [tex]{{\text{K}}_{\text{b}}}[/tex] and [tex]{{\text{K}}_{\text{a}}}[/tex] is expressed by following relation:
[tex]{{\text{K}}_{\text{w}}} = {{\text{K}}_{\text{b}}} \cdot {{\text{K}}_{\text{a}}}[/tex] …… (2)
Where,
[tex]{{\text{K}}_{\text{w}}}[/tex] is the ionic product constant of water.
[tex]{{\text{K}}_{\text{b}}}[/tex] is the dissociation constant of base.
[tex]{{\text{K}}_{\text{a}}}[/tex] is the dissociation constant of acid.
The value of [tex]{{\text{K}}_{\text{w}}}[/tex] is [tex]{10^{ - 14}}[/tex].
The value of [tex]{{\text{K}}_{\text{a}}}[/tex] is [tex]4.9 \times {10^{ - 10}}[/tex].
Substitute these values in equation (2).
[tex]{10^{ - 14}} = {{\text{K}}_{\text{b}}}\left( {4.9 \times {{10}^{ - 10}}} \right)[/tex]
Solve for [tex]{{\text{K}}_{\text{b}}}[/tex],
[tex]{{\text{K}}_{\text{b}}} = 2 \times {10^{ - 5}}[/tex]
The expression for [tex]{{\text{K}}_{\text{b}}}[/tex] of HCN is as follows:
[tex]{{\text{K}}_{\text{b}}} = \dfrac{{\left[ {{\text{HCN}}} \right]\left[ {{\text{O}}{{\text{H}}^ - }} \right]}}{{\left[ {{\text{C}}{{\text{N}}^ - }} \right]}}[/tex] …… (3)
Consider x to be change in equilibrium concentration. Therefore, equilibrium concentrationof [tex]{\text{C}}{{\text{N}}^ - }[/tex], HCN and becomes (0.2 – x), x and x respectively.
[tex]{\text{2}} \times {\text{1}}{{\text{0}}^{ - 5}} = \dfrac{{{x^2}}}{{\left( {0.2 - x} \right)}}[/tex]
Solving for x,
[tex]x = 0.002[/tex]
Therefore concentration of hydroxide ion is 0.002 M.
The expression to calculate pOH is as follows:
[tex]{\text{pOH}} = - \log \left[ {{\text{O}}{{\text{H}}^ - }} \right][/tex] …… (4)
Substitute 0.002 M for [tex]\left[ {{\text{O}}{{\text{H}}^ - }} \right][/tex] in equation (4).
[tex]\begin{aligned}{\text{pOH}} &= - \log \left( {0.002{\text{ M}}} \right) \\&= 2.69 \\\end{aligned}[/tex]
The relation between pH and pOH is as follows:
pH + pOH = 14 …… (5)
Substitute 2.69 for pOH in equation (4).
[tex]{\text{pH}} + 2.69 = 14[/tex]
Solving for pH,
pH = 11.31
Learn more:
Write the chemical equation responsible for pH of buffer containing and : https://brainly.com/question/8851686 Reason for the acidic and basic nature of amino acid. https://brainly.com/question/5050077Answer details:
Grade: High School
Subject: Chemistry
Chapter: Acids, base and salts
Keywords: pH, pOH, 11.31, 2.69, 14, 0.002 M, Kb, Kw, Ka, 10^-14, 2*10^-5.
Draw the compound that would produce 4-ethyl-3-hexanol in the presence of a nickel catalyst and hydrogen.
The compound that produces 4-ethyl-3-hexanol in the presence of nickel and hydrogen is [tex]\boxed{{\text{4 - ethylhexan - 3 - one}}}[/tex]. (Refer to the attached image)
Further Explanation:
The reduction reaction is a process in organic reactions where hydrogen atoms with or without the presence of catalyst like (Ni, Pt, and Pd.) are added to organic molecules like alcohols, phenols, aldehyde, and alkenes. It is also defined as a reaction where a less electronegative species is added to a more electronegative species.
Reduction of aldehyde or ketone compounds in the presence of nickel catalysts and hydrogen gives alcohol as the product.
A general reduction reaction is as follows:
[tex]{\text{RCHO}}\;{\text{ + }}\;{{\text{H}}_{\text{2}}}{\text{/Ni}} \to {\text{RC}}{{\text{H}}_{\text{2}}}{\text{OH}}[/tex]
In the hydrogenation reactions of aldehyde, the reduction of the carbonyl group takes place. The reaction of an aldehyde with hydrogen gas in presence of nickel catalyst leads to the formation of a primary alcohol, whereas the reaction of ketone with hydrogen gas in presence of nickel catalyst leads to the formation of a secondary alcohol.
[tex]{\text{4 - ethylhexan - 3 - one}}[/tex] reacts with hydrogen gas in the presence of nickel catalyst to undergo reduction reaction to form 4-ethyl-3-hexanol. (Refer to the attached image)
Learn more:
1. Identify the reducing reagent in the following reaction: https://brainly.com/question/6966537
2. Identify the reducing reagent in the following reaction: https://brainly.com/question/9613654
Answer details:
Grade: High School
Subject: Chemistry
Chapter: Reduction Reaction
Keywords: Reduction reaction, hydrogen, addition, 4-ethyl-3-hexanol, aldehyde, ketone, double, single, nickel, catalyst, 4-ethylhexan-3-one, hydrogenation and 4-ethyl-3-hexanol.
The two-slit diffraction experiment shows how light can be treated as particles and how light waves carry the statistical information for the experiment. if we were to use a beam of electrons instead of light in the experiment, how would the results differ?
The double-slit experiment is a famous tool to illustrate concepts within quantum mechanics. In particular it demonstrates the concept of wave-particle duality. Use of a light wave demonstrates diffraction and interference, which is a typical wave behaviour. Surprisingly, use of a beam of electrons also yields an interference pattern, showing electrons can behave like waves.
Explanation:
There would be a optical phenomenon pattern almost like, however totally different from, that exploitation light-weight.Interference and optical phenomenon are the phenomena that distinguish waves from particles: waves interfere and split, particles don't.
Light bends around obstacles like waves do, and it's this bending that causes the one slit optical phenomenon pattern.