Answer:
a) FFFF, FVFF, FFVF, FFFV,
FVFV, FFVV,FVVF,VVFF,
VFVF, VFFF,VFFV,FFVV
VVVV, VFVV, VVFV, VVVF
b) FVFF, FFVF, FFFV,VFFF
c) VVVV or FFFF
d) FFFF, FVFF, FFVF, FFFV, VFFF
e) FFFF, FVFF, FFVF, FFFV ,VFFF, VVVV
Step-by-step explanation:
For this case we define some notation:
F= mortgage classified as fixed rate
V= mortgage classified as variable rate
We select a sample of 4 mortgages.
Part a
We have 2*2*2*2= 16 possible combinations defined below:
FFFF, FVFF, FFVF, FFFV,
FVFV, FFVV,FVVF,VVFF,
VFVF, VVFF,VFFV,FFVV
VVVV, VFVV, VVFV, VVVF
Part b
Which outcomes are in the event that exactly three of the selected mortgages are fixed rate
We need to see in the possible outcomes from part a) how many we have exactly three F's .If we analyze the possible options the possible combinations are:
FVFF, FFVF, FFFV, VFFF
Part c
Which outcomes are in the event that all four mortgages are of the same type?
For this case we have just two possible values: VVVV or FFFF
Part d
Which outcomes are in the event that at most one of the four is a variable rate mortgage?
We need to see in the possible outcomes from part a) how many have at least one V. After analyze we see that the possible values:
FFFF, FVFF, FFVF, FFFV, VFFF
Part e
The union represent all four mortgages are of the same type or outcomes are in the event that at most one of the four is a variable rate. So we are looking for the possible outcomes VVVV and FFFF and the outcomes with just one V ( FVFF, FFVF, FFFV ,VFFF) so then the union would be:
FFFF, FVFF, FFVF, FFFV ,VFFF, VVVV
what is the total area of this prism?
T.A=
Answer:
The answer to your question is 61.8 in²
Step-by-step explanation:
Process
1.- Calculate the height of the triangle
3² = h² + 1.5²
h² = 3² - 1.5²
h² = 9 - 2.25
h² = 6.75
h = 2.6 in
2.- Calculate the area of the triangles
Area = [tex]\frac{base x height}{2}[/tex]
Area = [tex]\frac{3 x 2.6}{2}[/tex]
Area = 3.9 in²
There are 2 triangles = 2(3.9) = 7.8 in²
3.- Calculate the area of the rectangles
Area = base x height
Area = 6 x 3 = 18 in²
There are 3 rectangles = 3(18) = 54 in²
4.- Total area
At = 7.8 + 54
= 61.8 in²
Answer:
(104 +16√13) ft
Step-by-step explanation:
49. If a statistician specifies a 5% level of significance, then she will reject the null hypothesis only if her sample result differs from her hypothesized value by an amount that would occur by chance a) Less than 5% of the time. b) More than 5% of the time. c) 95% of the time or more. d) 2.5% of the time or less.
Answer:
The answer is a) less than 5% of the time
Step-by-step explanation:
By definition, the level of significance is the probability that one rejects a null hypothesis of a test when it is true. Denoted as alpha α, it shows how convincing the sample data is and concludes if it is statistically significant.
A level of significaance of 5% or 0.05, shows that you need more convincing power before determining whether you willreject the null hypothesis
By way of rule,
-If p-value ≤ level of significance α , then reject the null hypothesis.
-If p-value ≥ level of significance α , then do not reject the null hypothesis.
This implies that a statistician with a 5% level of significance will reject the null hypothesis if her hypothesized value falls below this mark.
Answer:
c) 95% of the time or more.
Step-by-step explanation:
The level of significance in a statistical research is the probability of rejecting the null hypothesis when it is actually true. A possible example is a significance level of 0.02 which indicates a 2% risk of concluding that a difference exists when there is no actual difference. The lower the significance level, the stronger the evidence required before you can reject the null hypothesis. 5% significance level may imply 95% confidence interval which means the range of values that occurs 95% of the time.
Therefore, rejecting the null hypothesis at 5% significance level means that the alternative hypothesis differs from the null hypothesis by 95% or more of its possible values (95% of the time or more).
One coin in a collection of 65 coins has two heads; the rest of the coins are fair. If a coin, chosen at random from the lot and then tossed, turns up heads six times in a row, what is the probability that it is the two-headed coin?
There is only 1 two-headed coin in the collection of 65 coins.
The probability of selecting the two headed coin is 1/65.
The outcome achieved when any of the other coins is tossed a number of times is based purely on chance.
Although if the 2-headed coin is selected, the only possible outcome is having a head, but It also possible to have 6 heads in 6 tosses with a coin that is not 2-headed.
What we're concerned with, is the probability that the 2-headed coin was selected from the lot of 65 coins, which is 1/65.
Answer:
There is only 1 two-headed coin in the collection of 65 coins.
The probability of selecting the two-headed coin is 1/65.
The outcome achieved when any of the other coins is tossed a number of times is based purely on chance.
Although if the 2-headed coin is selected, the only possible outcome is having a head, but It is also possible to have 6 heads in 6 tosses with a coin that is not 2-headed.
What we're concerned with, is the probability that the 2-headed coin was selected from the lot of 65 coins, which is 1/65.
Step-by-step explanation:
The U.S. government has devoted considerable funding to missile defense research over the past 20 years. The latest development is the Space-Based Infrared System (SBIRS), which uses satellite imagery to detect and track missiles (Chance, Summer 2005) The probability that an intruding object (e.g., a missile) will be detected on a flight track by SBIRS is .8. Consider a sample of 20 simulated tracks, each with an intruding object. Let x equal the number of these tracks where SBIRS detects the object.
a. Demonstrate that x is (approximately) a binomial random variable.
b. Give the values of p and n for the binomial distribution. .8.20
c. Find P(x = 15), the probability that SBIRS will detect the object on exactly 15 tracks. .17456
d. Find P(x lessthanorequalto 15), the probability that SBIRS will detect the object on at least 15 tracks. .804208
e. Find E(x) and interpret the result. 16
Answer:
a) Let the random variable X= "number of these tracks where SBIRS detects the object." in order to use the binomial probability distribution we need to satisfy some conditions:
1) Independence between the trials (satisfied)
2) A value of n fixed , for this case is 20 (satisfied)
3) Probability of success p =0.2 fixed (Satisfied)
So then we have all the conditions and we can assume that:
[tex] X \sim Bin(n =20, p=0.8)[/tex]
b) [tex] X \sim Bin(n =20, p=0.8)[/tex]
c) [tex]P(X=15)=(20C15)(0.8)^{15} (1-0.8)^{20-15}=0.17456[/tex]
d) [tex] P(X \geq 15) = P(X=15)+ .....+P(X=20) [/tex]
[tex]P(X=15)=(20C15)(0.8)^{15} (1-0.8)^{20-15}=0.17456[/tex]
[tex]P(X=16)=(20C16)(0.8)^{16} (1-0.8)^{20-16}=0.218[/tex]
[tex]P(X=17)=(20C17)(0.8)^{17} (1-0.8)^{20-17}=0.205[/tex]
[tex]P(X=18)=(20C18)(0.8)^{18} (1-0.8)^{20-18}=0.137[/tex]
[tex]P(X=19)=(20C19)(0.8)^{19} (1-0.8)^{20-19}=0.058[/tex]
[tex]P(X=20)=(20C20)(0.8)^{20} (1-0.8)^{20-20}=0.012[/tex]
[tex] P(X\geq 15)=0.804208 [/tex]
e) [tex] E(X) = np = 20*0.8 = 16[/tex]
Step-by-step explanation:
Previous concepts
The binomial distribution is a "DISCRETE probability distribution that summarizes the probability that a value will take one of two independent values under a given set of parameters. The assumptions for the binomial distribution are that there is only one outcome for each trial, each trial has the same probability of success, and each trial is mutually exclusive, or independent of each other".
The probability mass function for the Binomial distribution is given as:
[tex]P(X)=(nCx)(p)^x (1-p)^{n-x}[/tex]
Where (nCx) means combinatory and it's given by this formula:
[tex]nCx=\frac{n!}{(n-x)! x!}[/tex]
Part a
Let the random variable X= "number of these tracks where SBIRS detects the object." in order to use the binomial probability distribution we need to satisfy some conditions:
1) Independence between the trials (satisfied)
2) A value of n fixed , for this case is 20 (satisfied)
3) Probability of success p =0.2 fixed (Satisfied)
So then we have all the conditions and we can assume that:
[tex] X \sim Bin(n =20, p=0.8)[/tex]
Part b
[tex] X \sim Bin(n =20, p=0.8)[/tex]
Part c
For this case we just need to replace into the mass function and we got:
[tex]P(X=15)=(20C15)(0.8)^{15} (1-0.8)^{20-15}=0.17456[/tex]
Part d
For this case we want this probability: [tex] P(X\geq 15) [/tex]
And we can solve this using the complement rule:
[tex] P(X \geq 15) = P(X=15)+ .....+P(X=20) [/tex]
[tex]P(X=15)=(20C15)(0.8)^{15} (1-0.8)^{20-15}=0.17456[/tex]
[tex]P(X=16)=(20C16)(0.8)^{16} (1-0.8)^{20-16}=0.218[/tex]
[tex]P(X=17)=(20C17)(0.8)^{17} (1-0.8)^{20-17}=0.205[/tex]
[tex]P(X=18)=(20C18)(0.8)^{18} (1-0.8)^{20-18}=0.137[/tex]
[tex]P(X=19)=(20C19)(0.8)^{19} (1-0.8)^{20-19}=0.058[/tex]
[tex]P(X=20)=(20C20)(0.8)^{20} (1-0.8)^{20-20}=0.012[/tex]
[tex] P(X\geq 15)=0.804208 [/tex]
Part e
The expected value is given by:
[tex] E(X) = np = 20*0.8 = 16[/tex]
Which expression is equivalent to 6 minus (negative 8)?
Answer:
6 - (-8)
is 6 + 8
Step-by-step explanation:
Answer:
b
Step-by-step explanation:
If a population mean is 300 and the sample mean is 400, the difference of 100 is called:
A.Standard error
B.Sampling error
C.Allowable error
D.None of the above.
Answer:
B. Sample error.
Step-by-step explanation:
Such type of error is called Sample error.
Sample error occurs when
Sample error is a statistical error when an expert fails to choose a sample which symbolizes the whole data population and the outcomes of the sample do not reflect the outcomes from the whole population.
If a population mean is 300 and the sample mean is 400, the difference of 100 is called sampling error. So, option b is correct.
Sampling error represents the difference between the population mean and the sample mean, which arises purely by chance because a sample rather than the entire population is observed.
The other options are incorrect in this context:
Standard error: This measures the spread of the sample means around the population mean.Allowable error: This term refers to the acceptable range of error in forecasting or measurement but is not applicable in this context.Assume that the random variable X is normally distributed, with mean μ = 110 and standard deviation σ = 20. Compute the probability P(X > 126).
Answer:
P(X > 126) = 0.2119
Step-by-step explanation:
Problems of normally distributed samples can be solved using the z-score formula.
In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.
In this problem, we have that:
[tex]\mu = 110, \sigma = 20[/tex]
P(X > 126) is the 1 subtracted by the pvalue of Z when X = 126. So
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
[tex]Z = \frac{126 - 110}{20}[/tex]
[tez]Z = 0.8[/tex]
[tez]Z = 0.8[/tex] has a pvalue of 0.7881.
P(X > 126) = 1 - 0.7881 = 0.2119
The probability P(X > 126) for a normally distributed random variable X with mean μ = 110 and standard deviation σ = 20 is approximately 21.19%.
Explanation:This question is about computing the probability that a normally distributed random variable X with a specified mean and standard deviation exceeds a certain value. In our case, mean μ = 110 and standard deviation σ = 20, and we want to find the probability P(X > 126).
To solve this problem, we first need to compute the Z-score, which is a measure of how many standard deviations a given data point is from the mean, using the formula: Z = (X - μ) / σ. To compute P(X > 126), therefore, we first compute Z = (126 - 110) / 20 = 0.8.
Next, we look up the probability associated with Z = 0.8 in a standard normal distribution table. However, standard normal tables usually give the probability P(Z < z). Since we are looking for P(X > 126), or equivalently P(Z > 0.8), we need to subtract the value we get from the table from 1, since the total probability under a normal curve is one. If we look up Z = 0.8 in the table, we get approximately 0.7881. Hence, P(Z > 0.8) = 1 - P(Z ≤ 0.8) = 1 - 0.7881 = 0.2119 or about 21.19%.
Learn more about Probability here:https://brainly.com/question/22962752
#SPJ6
Find g(-x) when g(x) = 2x^2 -5x + 5
Answer: g(-x) = 2x^2 +5x + 5
Step-by-step explanation:
This Is a topic under functions in mathematics, it deals with substituting "x" for the new entity that has been placed in the new function you're asked to look for.
Hence, to solve this, we simply substitute "-x" for "x" wherever "x" appears in the equation.
By doing so, we go straight to the given function.
2x^2 -5x + 5
And we go ahead with our substitution which goes thus:
2(-x^2) -5(-x) + 5
On simplifying, we then finally have have:
2x^2 +5x + 5.
This means:
g(-x) = 2x^2 +5x + 5
What is the term associated with scores that are at the extreme ends of the distribution?
Answer:outliers
Step-by-step explanation:
Given f(x)= a×e−bx , where a = 1 and b = 6,
calculate g(x)=dfdx and obtain g(1) (that is, evaluate the derivative of f(x) at x = 1).
Report your answer with three significant figures.
Answer:
g(1) = -0.015
Step-by-step explanation:
We are given he following in the question:
[tex]f(x) = ae^{-bx}[/tex]
For a = 1 and b = 6, we have,
[tex]f(x) = e^{-6x}[/tex]
We have to find the the derivative of f(x) with respect to x.
[tex]g(x) = \dfrac{d(f(x))}{dx} = \dfrac{d(e^{-6x})}{dx}\\\\g(x) = -6e^{-6x}\\\\g(1) = \dfrac{d(f(x))}{dx}\bigg|_{x=1} = -6e^{-6} = -0.015[/tex]
Thus, g(1) = -0.015
10 granola bars and twelve bottles of water cost $23. 5 granola bars and 4 water bottles of water of water coat $10. how much does one granola and one water bottle cost
Answer:
One granola costs $1.40.
One water bottle costs $0.75.
Step-by-step explanation:
This question can be solved by a simple system of equations.
I am going to say that
x is the cost of each granola bar.
y is the cost of each bottle of water.
The first step is building the system:
10 granola bars and twelve bottles of water cost $23.
This means that:
10x + 12y = 23.
5 granola bars and 4 water bottles of water of water cost $10
This means that:
5x + 4y = 10
So we have to solve the following system of equations:
10x + 12y = 23
5x + 4y = 10
I am going to multiply the second equation by -2, and use the addition method. So:
10x + 12y = 23
-10x - 8y = -20
10x - 10x + 12y - 8y = 23 - 20
4y = 3
y = 0.75
y = 0.75 means that each water bottle costs 75 cents.
5x + 4y = 10
5x = 10 - 4y
5x = 10 - 4*0.75
5x = 7
x = 1.4.
x = 1.4 means that each granola costs $1.40.
Answer:one granola costs $1.4
One bottle of water costs $0.75
Step-by-step explanation:
Let x represent the cost of one granola.
Let y represent the cost of one water bottle.
10 granola bars and twelve bottles of water cost $23. It means that
10x + 12y = 23 - - - - - - - - - - - 1
5 granola bars and 4 water bottles of water of water cost $10. It means that
5x + 4y = 10 - - - - - - - - - - - 2
Multiplying equation 1 by 1 and equation 2 by 2, it becomes
10x + 12y = 23
10x + 8y = 20
Subtracting, it becomes
4y = 3
y = 3/4 = 0.75
Substituting y = 0.75 into equation 1, it becomes
10x + 12 × 0.75 = 23
10x + 9 = 23
10x = 23 - 9 = 14
x = 14/10 = 1.4
The quantity demanded x for a certain brand of MP3 players is 100 units when the unit price p is set at $80. The quantity demanded is 1100 units when the unit price is $40. Find the demand equation.
p =
Answer:p = (2100 - x)/25
Step-by-step explanation:
According to the law of demand, when the price,p of the brand of MP3 players is is high, the quantity,x of the brand of MP3 players demanded would be low and when the price,p of the brand of MP3 players is is low, the quantity,x of the brand of MP3 players demanded would be high.
To derive the demand equation, we would apply the slope intercept form of equation which is expressed as
y = mx + c
Where
m = slope
c = intercept
The slope, m would be
(y2 - y1)/(x2 - x1)
Slope = (1100 - 100)/(40 - 80) = 1000/-40
Slope = - 25
To find the y intercept, we would substitute m = - 25, y = 1100 and x = 40 into y = mx + c. It becomes
1100 = - 25 × 40 + c
1100 = - 1000 + c
c = 1100 + 1000 = 2100
y = - 25x + 2100
Therefore, the demand equation is
x = - 25p + 2100
25p = 2100 - x
p = (2100 - x)/25
Use De Morgan's law to select the statement that is equivalent to: "It is not true that the employee received a large bonus and has a big office."
a. The employee received a big bonus or has a big office.
b. The employee did not receive a big bonus and does not have a big office.
c. The employee did not receivę a big bonus or does not have a big office.
d. The employee received a big bonus and has a big office
Answer:
c. The employee did not receive a big bonus or does not have a big office.
Step-by-step explanation:
From the original statement, "It is not true that the employee received a large bonus and has a big office.", it can be concluded that the employee either has a big office, received a large bonus or neither. That is, either one, the other, or neither conditions are met.
Applying De Morgan's law:
a. This leaves out the possibility that both conditions are not met
b. This only considers that both conditions are not met
c. This statement means that one of the conditions are not met, which is correct.
d. This assumes both conditions are true, which is incorrect.
The statement equivalent to the negation of both an employee receiving a large bonus and having a big office is that the employee did not receive a big bonus or does not have a big office. Hence the correct
To apply De Morgan's laws to the statement "It is not true that the employee received a large bonus and has a big office," we need to negate the conjunction and change the 'and' to 'or' while negating each of the individual statements within the conjunction. De Morgan's laws tell us that the negation of a conjunction is equivalent to the disjunction of the negations. So the statement becomes:
The employee did not receive a large bonus or does not have a big office.
Therefore, the correct answer is (c) The employee did not receive a big bonus or does not have a big office.
Four fair coins are tossed at once. What is the probability of obtaining 3 heads and one tail? 2
Answer:
There are 16 possible outcomes, all equally likely. There’s only one way to get four heads and only one way to get no heads. That leaves 14 ways to get two or three heads.
There’s four ways to get three heads. The first coin can be the tail, the second can be the tail, the third can be the tail, or the fourth can be the tail.
There’s also four ways to get one head. The first coin can be the head, the second can be the head, the third can be the head, or the fourth can be the head.
That leaves six ways left to get exactly two heads. So 6/16 or 3/8.
Step-by-step explanation:
.... is a process where ordered pairs of points that solve an equation are found. The points are plotted on a grid and then connected with a smooth curve.
Answer: The answer is Point-by-point graphing
Step-by-step explanation:
Point-by-point graphing is a process where ordered pairs of points that solve an equation are found. The points are plotted on a grid and then connected with a smooth curve.
It can be helpful to classify a differential equation, so that we can predict the techniques that might help us to find a function which solves the equation. Two classifications are the order of the equation -- (what is the highest number of derivatives involved) and whether or not the equation is linear .
Linearity is important because the structure of the the family of solutions to a linear equation is fairly simple. Linear equations can usually be solved completely and explicitly. Determine whether or not each equation is linear:
1. (1+y2)(d2y/dt2)+t(dy/dt)+y=et
2. t2(d2y/dt2)+t(dy/dt)+2y=sin t
3. (d3y/dt3)+t(dy/dt)+(cos2(t))y=t3
4. y''-y+y2=0
Answer:
Second-order nonlinear ordinary differential equation. Second-order linear ordinary differential equation. Third-order linear ordinary differential equation. Second-order nonlinear ordinary differential equationStep-by-step explanation:
The objective is to determine whether or not each of the following equation is linear:
[tex](1+y^2)\frac{d^2y}{dt^2} + t \frac{dy}{dt} = e^t[/tex] [tex]t^2\frac{d^2y}{dt^2} + t \frac{dy}{dt} +2y= \sin t[/tex] [tex]\frac{d^3y}{dt^3} + t \frac{dy}{dt} + \cos (2t) y = t^3[/tex] [tex]y''-y+y^2 = 0[/tex][tex](1)[/tex]
We can rewrite this equation in the form
[tex](1+y^2)y''(t) +ty'(t) = e^t[/tex].
As we can see, this is an second-order nonlinear differential equation, because of the term [tex]1+y^2[/tex] next to [tex]y''(t)[/tex].
[tex](2)[/tex]
We can rewrite this equation in the form
[tex]t^2y''(t) + t y'(t) +2y= \sin t[/tex].
This is an second-order linear ordinary differential equation.
[tex](3)[/tex]
We can rewrite this equation in the form
[tex]y'''(t)+ t y' + \cos (2t) y = t^3[/tex]
This is an third-order linear ordinary differential equation.
[tex](4)[/tex]
This is an second-order nonlinear ordinary differential equation, because of the term [tex]y^2[/tex].
Data is collected from a:
A. sample
B. population
C. variable
D. None of the above answers is correct
Data is collected from a sample, which is a smaller subset of the population.
Explanation:The correct answer is A. sample. When data is collected, it is usually infeasible or impractical to collect information from an entire population. Therefore, a sample, which is a smaller subset of the population, is selected for data collection and analysis. For example, if we want to know the average height of students in a school, it would be time-consuming and costly to measure the height of every student. Instead, we can select a sample of students from different grades or classrooms to represent the entire population and collect data from them.
Learn more about Data Collection here:https://brainly.com/question/32425922
#SPJ2
A school psychologist wants to test the effectiveness of a new method of teaching logic. She recruits 200 sixth-grade students and randomly divides them into two groups. Group 1 is taught by means of the new method, while group 2 is taught by traditional methods. The same teacher is assigned to teach both groups. At the end of the year, an achievement test (graded on a scale from 1-10) is administered and the results of the two groups are compared. Complete parts (A) through (D) below.
A. What is the response variable in this experiment?
a. The score on the achievement test.
b. The students' ability in Health.
c. The score of Group 2 on the achievement test.
d. The score of Group 1 on the achievement test.
B. Which of the following explanatory variables is manipulated?
a. Intelligence
b. Teacher
c. Method of teaching
d. Grade level
C. How many levels of the treatment are there?
D. What type of experimental design is this?
a. Survey
b. Randomized block design
c. Completely randomized assignment
d. Matched Pair
In a statistical experiment, a response variable is something that “responds” to the changes made in the experiment. The changes are made to the independent variable (also called the manipulated variable).
For the experiment in question:
The response variable is the score on the achievement test.
The explanatory variable that is manipulated is the method of teaching
There are two levels of treatment ( the new teaching method and the traditional treating method)
The type of experimental design used is: Completely randomized assignment
The school psychology experiment's response variable is the score on the achievement test. The manipulated explanatory variable is the method of teaching. There are two treatment levels - the new method and the traditional method of teaching. The experiment follows a completely randomized assignment design.
Explanation:In this experiment conducted by the school psychologist, various aspects come into play.
A. The response variable in this experiment is option a: The score on the achievement test. The response variable is what you measure in the experiment and what is affected during the experiment. In this case, it's the score that the students get on the achievement test at the end of the year.
B. In this experiment, the explanatory variable that is manipulated is option c: Method of teaching. This is because it is the factor that the experimenter is changing in order to measure the effect on the response variable.
C. There are Two levels of the treatment in this experiment. The two modes of teaching – the new method and the traditional method constitute the two levels of treatment.
D. The type of experimental design used here is option c: Completely randomized assignment. The students were randomly divided into two groups for the purpose of the study which fits under this type of experimental design.
Learn more about Experimental Design here:https://brainly.com/question/33882594
#SPJ6
NOTE: If either of the products is not defined, type UNDEFINED for you answer. If the product is defined, type the dimension in the form mxn with NO spaces in betwee.
Answer:
a) Dimension of AB is DEFINED
b) Dimension of BA is UNDEFINED
Step-by-step explanation:
A matrix is always represented with (mxn) rows and columns. the rows are the elements in the horizontal line while the columns make up the elements in the vertical line. however, there are rules in multiplication of matrix.
To multiply matrix, multiply elements in the rows of the first matrix by the elements in the columns of the second matrix. for example if you're multiplying a 3by2 matrix by a 2by3 matrix, the resulting matrix will be a 3by3 matrix from (mxn) -rows and columns.
from the question, matrix A is a 3by5 (3x5) matrix i.e it has 3rows and 5columns.
matrix B is a 5by2 (5x2) matrix i.e it has 5rows and 2columns. multiplying AB = (3x5) X (5x2), hence the resultant matrix will be a 3by2 (3x2) and this shows that multiplication or dimension of AB is DEFINED.
As for the multiplication of BA = (5x2) X (3x5), from this multiplication, it is not possible as such we can't determine any resultant matrix, this makes multiplication or dimension of BA to be UNDEFINED.
If an angle of 145 is divided into 5 angles with ratios 1: 3: 5: 8: 12, what is the measure
of the 4th largest angle?
Answer:
15 °
Step-by-step explanation:
The five angles are splitted in the ratio 1:3:5:8:12
The 1st biggest angle is at ratio 12
The 2nd biggest angle is at ratio 8
The 3rd biggest angle is at ratio 5
The 4th biggest angle is at ratio 3.
Time solve for the 4th biggest angle, we will find the sum of the ratios:
Therefore, 1 + 3 + 5 + 8 + 12 = 29
Ratio of 4th biggest angle:
= (3)/(29). * 145
= (3 * 45) / 29
= 3 * 5
= 15 °
Renee attached a 6ft6in extension cord to her computer’s 3ft8in power cord. What was the total length of the cords?
Answer:
36+24= 60
Step-by-step explanation:
just do 6x6 and add it to 3x8
Answer: 10ft 2in
Step-by-step explanation:
A number is equal to 3 times a smaller number. Also, the sum of the smaller number and 4 is the larger number. The situation is graphed on the coordinate plane below, where x represents the smaller number and y represents the larger number. On a coordinate plane, a line goes through (0, 4) and (2, 6) and another line goes through (1, 3) and (2, 6). Which two equations represent the situation? y = one-third x and y = x minus 4 y = one-third x and y = x + 4 y = 3 x and y = x + 4 y = 3 x and y = x minus 4.
Answer: two equations represent the situation are
y = 3x and y = x + 4
Step-by-step explanation:
The smaller number was represented by x and its values on the x coordinate.
The larger number was represented by y and its values on the y coordinate.
The larger number is equal to 3 times a smaller number. This means that
y = 3x
Also, the sum of the smaller number and 4 is the larger number. This means that
y = x + 4
Answer:
two equations represent the situation are
y = 3x and y = x + 4
Step-by-step explanation:
A top-fuel dragster ran a 1/4-mile (1320 ft) race. It had traveled 1305.48 feet after 3.58 seconds and it traveled the entire 1320 feet in 3.61 seconds. What was its speed, approximately, in feet per second at the end of the race? In miles per hour?
The speed approximately of this top-fuel dragster is given as 330 miles per hour.
How to solve for the speedWe have 1320 feet distance in 3.61 sec
then we have 1305.48 feet in 3.58
Such that 1320-1305.48 = 14.52 feet
we have to do the conversions of feet into miles and seconds to become hours
1 mile = 5280feet
hence we have 14.52 feet as 14.52/5280
= 0.00275miles
then 0.03 seconds to hour = 0.03/3600
= 0.0000083
Speed = distance / time
0.00275miles/ 0.0000083
= 330 miles per hour
Read more on speed here: https://brainly.com/question/4931057
#SPJ1
To find the speed of the top-fuel dragster at the end of the race, divide the total distance traveled by the time taken. The speed at the end of the race is approximately 365.098 ft/s or 249.340 mph.
Explanation:To find the speed of the top-fuel dragster at the end of the race, we can divide the total distance traveled (1320 ft) by the time it took to cover that distance (3.61 s). This will give us the average velocity of the dragster.
So, the speed at the end of the race is approximately 365.098 ft/s.
To convert this speed to miles per hour, we can multiply it by the conversion factor 0.6818. This gives us the speed of the dragster at the end of the race in miles per hour, which is approximately 249.340 mph.
Evaluate the line integral Z C z2 dx 2y dy 2xz dz where C is any closed curve in the space.
Answer:
Some other information should be given, I have added those necessary information, should in case you come across a similar question on line integral.
Step-by-step explanation:
To evaluate line integral, some other information has to be given, Assume (so when you see a similar question, you will know how to evaluate line integral) as part of the question X =t2, Y = 2t and Z = 3t and at interval 0≤t≤1
A step by step explanation and calculation has been attached.
Help ? Pls ???????? Don’t know
Answer:
y=-3x+7
Step-by-step explanation:
y=mx+b is the formula you are going to end up once completed.
This, by given two points:
(4,-5) (3,-2)
[tex]\frac{-2-5}{3-4}[/tex] = Point-Slope Intercept Form
[tex]\frac{3}{-1}[/tex] = After subtracting both from above
-3 = is your slope, decreasing.
Substitute -3 for y=mx+b
y=-3x+b
Use one of the given points (any) to find what b equals.
(4,-5)
x y
-5=-3(4)+b
-5= -12+b
7=b
Final Equation:
y=-3x+7
Answer: y = -3x + 7
Step-by-step explanation:
The formula for calculating equation of line that passes through two points is given by :
[tex]\frac{y-y_{1}}{x-x_{1}}[/tex] = [tex]\frac{y_{2}-y_{1}}{x_{2}-x_{1}}[/tex]
[tex]x_{1}[/tex] = 4
[tex]x_{2}[/tex] = 3
[tex]y_{1}[/tex] = -5
[tex]y_{2}[/tex] = -2
substituting the values into the equation , we have :
[tex]\frac{y-(-5)}{x-4}[/tex] = [tex]\frac{-2-(-5)}{3-4}[/tex]
[tex]\frac{y+5}{x-4}[/tex] = [tex]\frac{-2+5}{3-4}[/tex]
[tex]\frac{y+5}{x-4}[/tex] = [tex]\frac{3}{-1}[/tex]
[tex]\frac{y+5}{x-4}[/tex] = -3
y + 5 = -3( x - 4 )
y + 5 = -3x + 12
y = -3x + 12 - 5
y = -3x + 7
Determine whether the data described are qualitative or quantitative. The maximum speed limit on interstate highways.
a. Qualitative
b. Quantitative
The data of the maximum speed limit on interstate highways is quantitative because it is expressible as a numerical value, which is an amount or quantity.
Explanation:The data described, 'the maximum speed limit on interstate highways', is quantitative. This is because data is quantitative when it is expressible as an amount or quantity. In this case, a speed limit is typically represented as a numerical value in miles or kilometers per hour, which is an amount or quantity. Therefore, the data of the maximum speed limit on interstate highways is quantitative.
Learn more about Quantitative Data here:https://brainly.com/question/32468163
#SPJ2
Assume that in the absence of immigration and emigration, the growth of a country's population P(t) satisfies dP/dt = kP for some constant k > 0 (see Equation (1) of Section 1.3). Determine a differential equation governing the growing population P(t) of the country when individuals are allowed to immigrate into the country at a constant rate r > 0. (Use P for P(t).)
dP dt =
What is the differential equation for the population P(t) of the country when individuals are allowed to emigrate at a constant rate r > 0?
dP dt =
Answer:
A) Differential equation for population growth in case of individual immigration is:
[tex]\frac{dP}{dt}=kP+r[/tex]
B) Differential equation for population growth in case of individual emigration is:
[tex]\frac{dP}{dt}=kP-r[/tex]
Step-by-step explanation:
Population growth rate in the absence of immigration and emigration is given as:
[tex]\frac{dP}{dt}=kP--(1)[/tex]
A) When individuals are allowed to immigrate:
Let r be the constant rate of individual immigration given that r >0.
Differential equation for population growth in this case is:
[tex]\frac{dP}{dt}=kP+r[/tex]
B) In case of individual emigration:
Let r be the constant rate of individual emigration given that r >0.
Differential equation for population growth in this case is:
[tex]\frac{dP}{dt}=kP-r[/tex]
Compute the line integral of the vector field F=⟨3zy−1,4x,−y⟩F=⟨3zy−1,4x,−y⟩ over the path c(t)=(et,et,t)c(t)=(et,et,t) for −9≤t≤9
Answer:
Step-by-step explanation:
Calls are repeatedly placed to a busy phone line until a connect is achieved. Let c = connect and b = busy, select the correct sample space, S, below: A. S = {b, c} B. S = {bbbbbb, ...} C. S = {cb, cbb, cbbb, ...} D. S = {c, bc, bbc, bbbc, ...}
Answer:
(D)
Step-by-step explanation:
[tex](A)[/tex]
Let's have a look at the first sample space, the set
[tex]S = \{b,c\}[/tex]
As we can see, it consists of two elements. Element [tex]b[/tex] implies that a call was made, but the line was busy, and the element [tex]c[/tex] implies that the call was connected. However, this sample space doesn't correspond to the event in which the calls are repeatedly made until a connect is achieved. The element [tex]c[/tex] is suitable, because it is possible that the line wasn't busy at the moment of calling, but the element [tex]b[/tex] implies that after receiving the busy signal, there were no further attempts to connect to the line.
[tex](B)[/tex]
The second sample space is
[tex]S =\{bbbbbb, \ldots \}[/tex]
It corresponds to the case in which after a few attempts to connect to the line, the person gave up. Therefore, it doesn't correspond to our problem.
[tex](C)[/tex]
The third sample space is
[tex]S = \{ cb, cbb, cbbb, \ldots \}[/tex]
It corresponds to the case in which after one successful attempt, the person tried again for a few more times, and also gave up before connecting again. Therefore, it doesn't correspond to our problem either.
[tex](D)[/tex]
The last sample space is
[tex]S = \{ c, bc, bbc, bbbc, \ldots\}[/tex]
The first element corresponds to the case that the line wasn't busy in the first attempt. The second element, [tex]bc[/tex], corresponds to the case in which the line was busy in the first attempt but it wasn't in the second. The third is the one in which the line was busy for three attempts, but wasn't in the fourth, and so on. As we can see, the common thing about all this elements is that the there were no further attempts after a connection was achieved, which corresponds to our case. Therefore, this is the correct sample space.
The correct option is D. S = {c, bc, bbc, bbbc, ...}.
The sample space for this scenario should include all possible outcomes of the calling process until a connection is made.
Since calls are placed repeatedly until the line is no longer busy, the sequence of events will consist of a series of 'b's followed by a 'c'.
The 'c' represents the successful connection, and it must be the last event in the sequence.
Option A, S = {b, c}, is incorrect because it only includes one busy signal or one connection without considering the sequence of events. Option B, S = {bbbbbb, ...}, is incorrect because it only includes sequences of busy signals without ever achieving a connection. Option C, S = {cb, cbb, cbbb, ...}, is incorrect because it starts with a connection 'c', which is not possible since the connection can only occur after a sequence of busy signals. Option D, S = {c, bc, bbc, bbbc, ...}, is the correct sample space. It represents all possible sequences of busy signals followed by one successful connection.Given {(x, f(x)):(x, f(x)) = (-2, 0), (3, 4), (7, 12), (9, -13)}, find the set of ordered pairs (x, 4[f(x)]).
Answer:
{(x, 4f(x)) = (-2,0), (3, 16), (7, 48), (9, -52)}
Step-by-step explanation:
We have the following set of ordered pairs:
(x, f(x))
(-2,0). So f(-2) = 0. That is when x = -2, y = 0.
(3,4). So f(3) = 4. That is, when x = 3, y = 4.
(7,12). So f(7) = 12. That is, when x = 7, y = 12.
(9, -13). So f(9) = -13. That is when x = 9, y = -13.
find the set of ordered pairs (x, 4[f(x)]).
We just need to multiply the values of y by 4. So the set is
{(x, 4f(x)) = (-2,0), (3, 16), (7, 48), (9, -52)}