Answer:
An electric motor converts electrical energy into mechanical energy. The process is as follows:
D. When current flows through the motor, it powers electromagnets that are attracted and repelled by the poles of permanent magnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the mechanical energy available.
Which best describes accuracy?
A.) the smallness of the graduations on a measuring tool
B.) the reproducibility of a measured value
C.) the dependence of a measured value on a controlled value
D.) the agreement between a measured value and an accepted value
Answer: A.) the smallness of the graduations on a measuring tool
Explanation:
Accuracy is defined as the closeness of the measured value to the actual value. Therefore, out of the options, this is best described by A. the smallness of the graduations on a measuring tool. This is because smaller graduations mean that the value can be measured to a smaller level, making it more accurate. PLEASE GIVE ME BRAINIEST
1. seesaw
third-class lever
2. pencil sharpener
second-class lever
3. bottle opener
wheel and axle
4. forearm
wedge
5. nail
first-class lever
Answer:
1 seesaw = first class lever
2. pencil and sharpener = wheel and axle
3. bottle opener = second class lever
4. forearm = third class lever
5. nail = wedge
Explanation:
The given objects are classic examples of simple machines.
Lever: There are 3 types of levers and they depend on where the load, applied force, and fulcrum are.
First class levers have the fulcrum in between the load and the applied force. In other words, the load and applied force are at opposite ends. The seesaw is a good example of this. Other examples would be, pliers, scissors, and the like.
Second class levers have the fulcrum and the applied force at the opposite ends. So in this case, the load is found in between. Examples of this would be a bottle opener or a crowbar.
For third class levers, the load and the fulcrum are at opposite ends and the applied force is in between. The forearm is a good example, so is a stapler, or even a broom.
A wedge is another simple machine. It is thick at one end and it gets thinner towards the other end, or it usually has a sharp end. Other examples of this would be an axe, or a knife.
A sharpener is actually a compound machine. The old-fashioned type of pencil sharpener, the one you crank makes use of a wheel and axle and a wedge. A wheel and axle is usually a machine that makes use of two circular parts; a wheel and a rod that is attached to its center.
Final answer:
The list involves identifying simple machines such as lever, wheel and axle, and the wedge. Key corrections include seesaw as a first-class lever, pencil sharpener utilizing wheel and axle, and a nail being a wedge.
Explanation:
The classification of the items listed involves understanding the basic types of simple machines recognized since the Renaissance—lever, wheel and axle, pulley, inclined plane, wedge, and screw. These machines serve as the foundational building blocks to explain how more complicated machines work, offering a mechanical advantage by altering the magnitude or direction of forces. Renaissance scientists identified these six simple machines as crucial in understanding mechanical principles.
A seesaw is an example of a first-class lever, where the fulcrum is between the input force and the load.
A pencil sharpener uses a wheel and axle, which consists of a rod (the axle) fixed to the center of a wheel, simplifying the twisting motion.
A bottle opener typically functions as a second-class lever or sometimes as a lever of another class, depending on its design, where the load is between the fulcrum and the effort.
The forearm acts as a lever within the human body, showcasing how levers are crucial in the design of living organisms for movements such as flexing and extending.
A nail is best described as a wedge, which is essentially two back-to-back inclined planes that apply force over a wider area.
Error corrections in the initial classification include identifying the seesaw as a first-class lever, the bottle opener's potential as a second-class lever depending on its design, the pencil sharpener as involving wheel and axle mechanics, the forearm as a biological example of lever mechanics, and finally, recognizing a nail as a form of wedge, not a lever.
What effect does solar radiation have on climate when comparing the equator to polar- regions?
Answer:
The solar radiation is one of the main factors that shapes the climate all over the globe, so the climate differs with the less or more solar radiation it gets. The polar regions are cold, this is due to the fact that the solar radiation in here is very obscure, because the solar radiation falls at a very wide angle the heat is dispersed over larger area, thus the land gets very little warmth. The Equator, on the other hand, gets direct solar radiation, the sun light falls at a 90 degrees angle or close to it, so the radiation is more concentrated on a smaller area, thus the warming is bigger.
* hopefully this helps:) Mark me the brainliest:)!!!
Final answer:
Solar radiation impacts the equator and polar regions differently; the equator receives more direct sunlight, resulting in higher temperatures and less seasonal variation, while the polar regions receive oblique rays that lead to less intense solar radiation and increased seasonal temperature extremes. The Earth's oceans and atmosphere redistribute heat, and the tilt of the Earth contributes to seasonal differences in climate.
Explanation:
The solar radiation affects the climate differently at the equator compared to the polar regions due to the Earth's curvature and tilt. Near the equator, solar radiation is more direct, leading to higher temperatures and more consistent climatic conditions throughout the year. In contrast, polar regions receive oblique rays, resulting in less intense solar radiation and more extreme seasonal variations in temperature.
Oceans and the atmosphere work together to redistribute this heat, moderating climates by transferring warmth from equatorial regions to the poles. This is facilitated by ocean currents and atmospheric circulation, which move heat laterally across the planet, bringing about a more balanced climate globally. The presence of ice and snow in polar regions, with high albedo, reflects significant amounts of solar radiation, further reducing the energy absorbed in these areas.
Throughout the year, solar radiation varies based on latitude, with regions between 23.5 degrees north and south experiencing the highest amounts of solar radiation during the equinoxes. The changing angles of solar radiation due to the Earth's tilt contribute to seasonal differences, with more direct sunlight during summer months leading to warmer temperatures and an increased angle during winter causing more reflected sunlight and cooler temperatures.
Obi Wan uses his Jedi mind tricks to compel people to do his will. The words he uses begin in his vocal cords which _____ the air molecules in his throat.
Answer:
The correct missing word is: vibrate.
Explanation:
The words he uses begin in his vocal cords which vibrate the air molecules in his throat.
The process by which the air pressure from the lungs is converted into audible vibrations is known as phonation.
When the air passes through the vocal folds, it causes them to vibrate, as phonation occurs. It is due to the vocal folds that a singer has a wide range of control over the pitch of his voice.
Conduction stops when all substances have
Answer:-
It stops when the temperature of all the particles/atoms is equal.
Explanation:
When two objects or substances that have different temperature are placed in contact with each other then there will be flow of heat from hotter object to colder object.
This transfer of heat will continue until the temperature of both the objects become equal.
For example, if a metal box has [tex]T_{1}[/tex] temperature that is higher than another metal box adjacent to it which has [tex]T_{2}[/tex] temperature. Then heat will flow from [tex]T_{1}[/tex] to [tex]T_{2}[/tex] until the temperature of both the boxes become equal to [tex]T_{3}[/tex].
Hence, we can conclude that conduction stops when all substances have same temperature.
Billy did an investigation to learn whether bean plants will grow if they are given salt water. Billy repeated his experiment three different times. Each time, he used the same kind of been seeds, and he made the salt water by adding exactly 20 grams of salt to 1 liter of water. What is Billy doing by using the same beans and making the salt water exactly the same way each time?
A. using consistency and precision
B. making hypotheses and inferences
C. using safety and observation
D. making predictions and conclusions
B should be your answer good luck!
Answer:
B
Explanation:
THE Answer should be b
HELP!!!
Which of these would be supported by the graph?
Answer:
C
Explanation:
It is the answer
Answer:
C. KBr is about twice as soluble as NaCl at 60°C
Explanation:
From the graph of solubility of various solutes with respect to temperature we can figure-out that on y-axis we have the increasing solubility of the solvents in gram per 100 gram of water as we move upwards and on x-axis we have increasing temperature of the solvent (water) moving rightwards.
As we move vertically up through 60°C line we notice that NaCl has solubility nearly 40 grams per 100 gram of water whereas on further moving up in the same line we find that KBr has nearly 80 gram per 100 gram of solubility.
The solubility of NaCl varies negligibly with change in the temperature of water whereas the solubility of KNO3 is greatly increased by the increasing temperature.
Solid solutes have a tendency to dissolve highly in the water with increase in temperature because of increased inter molecular space of the solvent molecules on heating and loosening of the bonds of solid solute.But in case of a gaseous solute the tendency to dissolve into water decreases with increase in temperature because here if the kinetic energy of the molecules increases for the solute then its molecules will escape from the solvent.Sarah walks 2 kilometers north from her house to the grocery store. Then, she leaves the grocery store and walks 3 kilometers further north to her grandma’s house. She finally leaves her grandma’s house and walks home.
b. What is Sarah’s distance?
a. What is Sarah’s displacement?
Answers: B) distance=10km
A) displacement=0km
Distance is a scalar of total unit distance travelled not depending upon path taken.
Displacement is a vector of unit displacement travelled along according to the path taken. So if we go 5km north and then go another 5km south to return home we have not had any displacement as we ended back at our starting point.
Hope this helps you understand some. Any questions feel free to ask. Thank you.
Please I need help on this one
Answer:
Your answer would be A, Ball A had more kinetic energy than Ball B.
Explanation:
This is the correct answer because kinetic energy is motion. If balls A and B have an equal mass, but ball A reaches the end of the lane quicker, this is the only answer that is possible.
What happens to kinetic energy when the speed doubles
Hello There!
Because kinetic energy is proportional to the square of the velocity, when velocity is doubled, kinetic energy is quadrupled.
John is creating a series circuit of Christmas lights. He wants to create a strand that has 2 fans and 20 lights. Each fan has a resistance of 5 ohms. Each light has a resistance of 3 ohms. What is the total resistance of the circuit?
A. 76 ohms
B. 66 ohms
C. 70 ohms
D. 60 ohms
Answer:C
Explanation:
Total Resistance=R1+R2
R1=2*5=10ohms
R2=3*20=60ohms
Therefore; Total R=10+60
=70ohms
The total resistance of the series circuit is calculated by adding the resistances of all the individual components. By calculating and adding together the total resistance for the fans and the lights, you find that the total resistance for the circuit is 70 ohms.
Explanation:In a series circuit, the total resistance is obtained by simply adding up all the individual resistances within the circuit. Therefore, to find the total resistance of John's circuit, you need to multiply the number of each component by its resistance and add these totals together.
For the fans: 2 fans × 5 ohms per fan = 10 ohms.
For the lights: 20 lights × 3 ohms per light = 60 ohms.
Adding these two totals together gives the total resistance of the circuit: 10 ohms + 60 ohms = 70 ohms. So the total resistance of the circuit is 70 ohms, making the answer choice C. correct.
Learn more about series circuit here:
https://brainly.com/question/38034001
#SPJ2
In a spontaneous reaction-
A. The reaction happens very quickly
B.Additional heat is required to make it occur
C. No additional heat is required to make it occur
D. Additional heat is absorbed from the environment
Answer:
C. No additional heat is required to make it occur
Explanation:
A reaction is said to be spontaneous if it can occur on its own. Spontaneous reactions do not require additional energy or heat from other sources to occur.
A spontaneous reaction leads to an increase in the disorderliness of a system.
We can use the free energy change of a system which measures the energy of a system used to useful work to predict the spontaneity of a reaction.
If the Free energy change is negative the reaction is said to be spontaneous or feasible.
Which of the following statements regarding the moon and Earth is correct?
A. Earth and the moon are nearly the same age.
B. Earth and the moon have nearly the same mass.
C. Earth is tidally locked, while the moon spins on its axis.
D. The moon is older than Earth by approximately 300 million years.
Answer: Option 'D' is correct.
Explanation:
Earth has one natural satellite i.e. "Moon".
Earth spins on its axis due to moon is tidally locked.
The mass of moon is much greater than the mass of earth.
The age of moon is much older than the age of Earth.
The moon is older than Earth by approximately 300 million years.
so, only one statement is correct i.e. 'D'.
Hence, Option 'D' is correct.
Answer:
TOOK THE TEST AND GOT IT WRONG! D IS NOT THE ANSWER!!
Explanation:
Hope this helps! have a good day!
Is carbon a metal, nonmetal, or semi-metal
Answer: Non metal.
Explanation: Carbon has 4 electrons in it’s valence shell which makes it a metalloid but commonly it is considered as a non metal.
Carbon is considered a nonmetal due to its brittleness, dull appearance, and inability to be reshaped into sheets or wires, despite being a good conductor of heat and electricity.
Explanation:Is Carbon a Metal, Nonmetal, or Semi-Metal?
Carbon is classified as a nonmetal. It is a black and brittle substance that is a good conductor of electricity and heat, which might seem like metallic properties. However, unlike metals, carbon cannot be made into sheets or wires because it is not malleable or ductile. In fact, carbon exhibits several nonmetallic properties such as being dull and brittle. When examining the periodic table, nonmetals are located in the upper right corner except for hydrogen, which is why carbon firmly fits within the nonmetal classification.
In contrast, metals are typically shiny, silvery, and excellent conductors of heat and electricity, plus they can be shaped into sheets (malleable) or wires (ductile). Semi-metals or metalloids exhibit properties that are intermediate between metals and nonmetals. These elements are found along a diagonal band on the periodic table. Therefore, based on its properties and location on the periodic table, carbon is considered a nonmetal.
The duckbill platypus and spiny anteater are the only two known
marsupials.
a. true
b. false
Answer:
I believe it is False.
Explanation:
Hope my answer has helped you!
Maya tried to hit four golf balls into a hole marked with a flag. The diagram shows where the golf balls landed.
Answer:
Explanation: high precision, high accuracy, how did i get it well the golf balls were not accurate but the precision of the balls were all in one place.
Answer:
High precison, low accuracy
Explanation:
Calculate the orbital radius of the hydrogen atom for the first principal quantum number. Use the general expression given in the test to calculate this value. (Hint: Quantum numbers are not significant digits and should not be counted as such in determining your final answer. Thus, this answer should have 2 significant digits.)
1.1
0.53
5.3
Answer:
5.3 A
Explanation:
The orbital radius for the generic nth-level in the hydrogen atom is given by
[tex]a_n = n^2 a_0[/tex]
where:
[tex]a_0 = \frac{\epsilon_0 h^2}{\pi m_e e^2}[/tex]
is the Bohr radius, with
[tex]\epsilon_0 = 8.85\cdot 10^{-12} F/m[/tex] being the vacuum permittivity
[tex]h=6.63\cdot 10^{-34}Js[/tex] is the Planck constant
[tex]m_e = 9.11\cdot 10^{-31} kg[/tex] is the electron mass
[tex]e=1.6\cdot 10^{-19} C[/tex] is the electron charge
Substituting all this numbers into the formula, we find
[tex]a_0 = 5.3\cdot 10^{-10} m = 5.3 A[/tex]
and since
n = 1
the radius of the hydrogen atom for the first principal quantum number is
[tex]a_1 = 1^2 a_0 = 1 \cdot (5.3 A)=5.3 A[/tex]
Answer:
0.53 A
Explanation:
Study the image. Which phase of the moon as shown? Full moon, first quarter, waning gibbous, waxing crescent
-- If you're observing the moon from a location in the northern hemisphere, like Canada, Russia, the US, or Israel, then it looks like this picture during the waxing crescent phase.
-- If you're observing the moon from a location in the southern hemisphere, like Australia, South Africa, Paraguay, or Antarctica, then it looks like this picture during the waning crescent phase.
Answer:
D. waxing crescent.
Explanation:
So first off its definetly not a full moon because its not full. Not a first quarter because a first quarter is away from the sun on the side of the earth. and not a waning gibbous because only a waxing crescent would be like the one shown on the picture so therefore, its D
On a day when the velocity of sound is 340 m/s, a boy drops a stone from the top of a high tower. If the tower is 50 m tall, how long will it take for the boy to hear the returning sound?
Answer:
It takes 3.31 s for the boy to hear the returning sound of the stone
Explanation:
Ok, the time after which splash is heard is equal to the time acquired by the stone to reach the ground + time taken by sound to return.
First, u=0 m/s (this is the initial speed with which the stone was thrown), h=50 m (is the height of the tower) and g=10 m/[tex]s^{2}[/tex] (is the gravity)
We can use this equation that relates the free fall of the object:
[tex]h=u+\frac{1}{2} gt^{2}[/tex]
[tex]50=0+\frac{1}{2}(10)t^{2}[/tex]
[tex]50=5t^{2}[/tex]
[tex]10=t^{2}[/tex]
and [tex]t=\sqrt{10}=3.16 s[/tex]
t =3.16 s is the time it takes the stone to fall
Second, h=50 m and v=340 m/s (that it's the speed of sound)
We can use this equation:
[tex]h=vt[/tex]
[tex]t=\frac{h}{v}[/tex]
[tex]t=\frac{50}{340}=0,15 s[/tex]
t=0.15 is the time it takes for the sound to return
Finally, both times are added, obtaining the time in which the boy will hear the returning sound of the stone:
[tex]t= 3.16 s + 0.15s[/tex][tex]=3.31 s[/tex]
Identify one organism in the chart that is a decomposer
Answer: Most decomposers are microscopic organisms, including protozoa and bacteria. Other decomposers are big enough to see without a microscope. They include fungi along with invertebrate organisms sometimes called detritivores, which include earthworms, termites, and millipedes.
Explanation:
1)
What is a column called in the periodic table and what do the elements in each column have in common?
A) period; the same atomic mass
B) group; the same number of electrons
C) period; the same number of atomic orbitals
D) group; the same number of valence electrons
2)
The alkali metals, found in group 1 of the periodic table, are very reactive metals that do not occur freely in nature. These metals have only one electron in their outer shell. Therefore, they readily lose that one electron to form ionic bonds with other elements. Sodium (Na) is an alkali metal that bonds with Chlorine (Cl), a halogen, to form table salt (NaCl). Based on what the periodic table can tell you about these two elements, explain how and why they bond to form NaCl.
A) Na and Cl share electrons to form an ionic bond.
B) Na and Cl share electrons to form a covalent bond.
C) Na and Cl transfer electrons to form ions and create an ionic bond.
D) Na and Cl transfer electrons to form ions and create a covalent bond.
Answer:
1. D) group; the same number of valence electrons
A group is a column in the periodic table where elements have the same number of valence electrons. Sodium and Chlorine bond to form table salt through an ionic bond.
Explanation:A column in the periodic table is called a group. Elements in each group have the same number of valence electrons. This means that they have similar chemical properties and tend to react in similar ways.
Sodium (Na) and Chlorine (Cl) bond to form table salt (NaCl) through an ionic bond. Na transfers an electron to Cl, resulting in the formation of Na+ and Cl- ions. The opposite charges of the ions attract each other, creating the ionic bond in NaCl.
Learn more about Periodic table here:https://brainly.com/question/35461104
#SPJ2
7. A force of 100 N acting on a body gives it a speed of 200 m/s in 2
sec. what is the mass of the body?
a. 1kg
b. 5 kg
c. 10kg
d. 15kg
Answer:
Choice a. 1 kg, assuming that all other forces on the object (if any) are balanced.
Explanation:
By Newton's Second Law,
[tex]\displaystyle a = \frac{\Sigma F}{m}[/tex],
where
[tex]a[/tex] is the acceleration of the object in [tex]\text{m}\cdot\text{s}^{-2}[/tex],[tex]\Sigma F[/tex] is the net force on the object in Newtons, and[tex]m[/tex] is the mass of the object in kilograms.As a result,
[tex]\displaystyle m = \frac{\Sigma F}{a}[/tex].
Assume that all other forces on this object are balanced. The net force on the object will be [tex]100\;\text{N}[/tex]. The net force is constant. Acceleration should also be constant and the same as the average acceleration in the two seconds.
What is the average acceleration of this object?[tex]\displaystyle \begin{aligned}\text{Acceleration} &= \text{Average Acceleration}=\frac{\text{Change in Velocity}}{\text{Time Taken}}\end{aligned}[/tex].
[tex]\displaystyle {a} = \frac{200\;\text{m}\cdot\text{s}^{-1}}{2\;\text{s}}=100\;\text{m}\cdot\text{s}^{-2}[/tex].
Apply Newton's Second Law to find the mass of the object.[tex]\displaystyle m = \frac{\Sigma F}{a} = \frac{100\;\text{N}}{100\;\text{m}\cdot\text{s}^{-2}} = 1\;\text{kg}[/tex].
Answer:
a.1kg
Explanation:
What change of state occurs during vaporization?
Answer:
Liquid to gas
Explanation:
When molecules are in the liquid state, they are held together by internal forces of the molecules while moving in a constant motion.Increasing the temperature through heating, will make the molecules move faster and collide at a higher rate because they gain kinetic energy after obtaining the heat.This will loosen the forces holding the molecules together leading to vaporazation.
An airplane flies 525 kilometers north in 1.25 hours. What is the airplane's velocity?
Speed = (distance covered) / (time to cover the distance)
Speed = (525 km) / (1.25 hrs)
Speed = (525/1.25) km/hr
Speed = 420 km/hr
Velocity = speed and the direction from start to finish
Velocity = 420 km/hr North
Velocity of a object is the ratio of distance covered by the object to the time taken by it. The velocity of the airplane is 420 kilometre per hours.
Given information-
The total distance covered by the airplane in north direction is 525 kilometres.
The total time taken by the airplane to cover this distance is 1.25 hours.
What is velocity?Velocity of a object is the ratio of distance covered by the object to the time taken by it.
It can be given as,
[tex]v=\dfrac{x}{t}[/tex]
Here, [tex]x[/tex] is the distance covered by the object and [tex]t[/tex] is time taken by it.
As he total distance covered by the airplane in north direction is 525 kilometres and the total time taken by the airplane to cover this distance is 1.25 hours.
Thus the velocity of the body can be given as,
[tex]v=\dfrac{525}{1.25}\\v=420[/tex]
Hence the velocity of the airplane is 420 kilometre per hours.
Learn more about the velocity here;
https://brainly.com/question/862972
Calculate the work done to stretch an elastic string by 40cm if a force of 10N produces an extension of 4cm in it?
Answer:
40 J
Explanation:
Work = change in energy
W = 1/2 k (Δx)²
First we need to find the value of k.
F = kΔx
10 N = k (0.04 m)
k = 250 N/m
Solving for work
W = (250 N/m) (0.40 m)²
W = 40 J
What color would correspond with the peak wavelength of a star that has an extremely high temperature?
A. Yellow
B. Blue
C. Red
D. Green
Answer:
Blue
Explanation:
The answer isssss Blue
If the mass of an object on earth is 100 kg what is it’s weigjt in earth
W = 980N. The weight of an object of 100Kg in the Earth is 980N.
The weight is a measure of the gravitational force acting on an object, the weight is equivalent to the force exerted by a body on a point of support, caused by the action of the local gravitational field on the mass of the body.
it can be defined as the product of mass by the acceleration of gravity, w = mg. Since weight is a force, its unit is the Newton N.
If the mass of an object on earth is 100 kg, then is weight is:
W = (100Kg)(9.8m/s²) = 980N.
Which describes an object in projectile motion? Check all that apply.
Gravity acts to pull the object down.
The object moves in a straight path.
The forward velocity of the object is 0 m/s.
The object’s inertia carries it forward.
The path of the object is curved.
Please and Thank You!
Answer:
Gravity acts to pull the object down.
The object’s inertia carries it forward.
The path of the object is curved.
Explanation:
The motion of a projectile consists of two separate motions:
- A uniform motion along the horizontal direction, where the velocity is constant; since there are no forces along this direction, the velocity does not change, and so the object continues its motion for inertia --> so, the statement "The object’s inertia carries it forward" is true.
- A uniformly accelerated motion along the vertical direction, with a constant downward acceleration (g=9.8 m/s^2, acceleration due to gravity). So, the vertical velocity changes, due to the presence of the gravity that acts to pull the object down.
- As a result of the combination of these two motions, the object follows a curved path (in particular, it is a parabolic path).
Lithium atoms give electrons to bromine atoms to form
Lithium atoms give electrons to bromine atoms to form ionic bond.
What is ionic bond?Lithium (Li) is the 3rd element in the periodic table. It can chemically combine with the Bromine (Br) element to form a chemical compound called Lithium bromide.
The Lithium Bromide compound is formed by lithium and bromine is an ionic compound. The bond formed between lithium and bromine is due to the transfer of electrons.
Thus, the Lithium atoms give electrons to bromine atoms to form ionic bond.
Learn more about ionic bond.
https://brainly.com/question/11527546
#SPJ2
A person walks 2 miles every day to work, leaving her front porch at 7:00 A.M. and arriving at work at 7:30 A.M. ON the way home she walks the same route and ends at her front porch. What is her displacement?
Answer:
The displacement is zero miles
Explanation:
The displacement of an object that moves from point A to point B is defined as
[tex]d =B-A[/tex]
Where d is the displacement of the object. The displacement does not depend on the trajectory of the object. It only depends on the linear distance between the end point and the starting point.
In this case we know that the person walks from home to work and then walks from work to home. Therefore, the total displacement is the linear distance between the point where its journey begins and the point where the route ends.
The tour begins on the front porch of your house and ends on the front porch of your house (when you return from work). If we call A to the front porch of the house then the displacement is:
[tex]d = A-A = 0[/tex]
The displacement is zero miles, since the person finishes the journey just where it started (front porch)